Power Windows; Power Window Controls - Alfa Romeo Giulia 2024 Owner's Manual

Hide thumbs Also See for Giulia 2024:
Table of Contents

Advertisement

Phones must always be placed on the wireless
charging pad within the outline shown on the pad so
that its charging parts connect with the charging
coils of the system. Movement of the phone during
charging may prevent or slow the rate of charge.
Having multiple applications open on the phone
while charging will reduce the charging efficiency,
and may even shut down an application that is
actively running (i.e. Apple CarPlay®). This may also
cause the phone to overheat.
Wireless chargers may implement certain methods
to prevent the phone from overheating during
charging such as slowing down the rate of charge. In
certain instances, the device may shut down for a
brief period of time (when the device reaches a
certain temperature). If this happens, it does not
mean there is a fault with the wireless charging pad.
This may just be a protective measure to prevent
damage to the phone.
The use of multiple wireless functions at the same
time (wireless charging, Apple CarPlay®, Android
Auto™) could cause the device to overheat, resulting
in limitation of the functions or it turning off. In this
case, it is recommended to connect the system
using the USB port.
Do not place the key fob or any other type of
metal/magnetized object inside the mobile phone
housing or near the wireless charging pad.
With a compatible device placed on the charging
pad, and the ignition is cycled to the OFF position, a
reminder message may appear on the instrument
cluster display to warn the driver.
CAUTION!
The key fob should not be placed on the charging pad
or within 6 inches (15 cm) of it. Doing so can cause
excessive heat buildup and damage to the fob.
Placing the fob in close proximity of the charging pad
blocks the fob from being detected by the vehicle and
prevents the vehicle from starting.
The following messages will display in the radio system:
"Your Phone Is Being Charged" — The phone has
begun to charge.
"Phone Fully Charged" — The phone has completed
charging its battery.
"Foreign Object Detected" — The phone is not
enabled for wireless charging or an object that is
not permitted has been placed on the wireless
charging pad.
"Unavailable System" — There is a malfunction with
the wireless charging pad.
The driver can deactivate these messages through the
radio system
page 180.

POWER WINDOWS

P
W
C
OWER
INDOW
ONTROLS
The power window switches work with the ignition in
the ACC or ON/RUN position and for three minutes
after the ignition has been placed in the OFF position.
When one of the front doors is opened, this operation
is disabled.
The window controls on the driver's door control all the
door windows.
Power Window Switches
1 — Front Left Window Switch
2 — Front Right Window Switch
3 — Rear Right Window Switch
4 — Window Lockout Switch
5 — Rear Left Window Switch
The passenger door windows can also be operated by
using the single window controls on the passenger door
trim panel.
To open the window part way (manually), push the
window switch down briefly and release. Push past the
detent to activate "continuous automatic" operation.
If the button is pushed again, the window will stop in
the desired position.
Pull the window switch to the first detent to move the
window upward. Pull the window switch to the second
detent, and the window will go up automatically.
To close the window, pull the window switch up. To stop
the window during Auto-Up operation, push or pull the
window switch again.
61

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stelvio 2024

Table of Contents