Ignition modes
The vehicle's ignition can be put in various
modes (levels) to make different functions availa-
ble.
To enable the use of a limited number of func-
tions when the engine is not running, the ignition
can be put in one of three different levels: 0, I
and II. These levels are referred to as "ignition
modes" in the Owner's Manual.
The following table shows which functions are
available in each ignition mode:
Mode
Functions
0
The odometer, clock and tem-
•
perature gauge are illuminated
The power* seats can be
•
adjusted.
The power windows can be used.
•
The center display is activated
•
A
and can be used
.
The infotainment system can be
•
A
used
.
In this mode, the functions are availa-
ble for a limited time and then switch
off automatically.
I
The panoramic roof, power win-
•
dows, 12-volt electrical socket in
the passenger compartment,
Bluetooth, navigation, phone,
blower and windshield wipers can
be used.
The power seats can be adjusted.
•
•
The 12-volt electrical socket* in
the trunk can be used.
Electrical current will be taken
from the battery in this ignition
mode.
Mode
Functions
II
The headlights illuminate.
•
A
.
Warning/indicator lights illumi-
•
nate for 5 seconds.
A number of other systems are
•
activated. However, seat and rear
window heating can only be acti-
vated when the engine is running.
This ignition mode uses a lot of
current from the battery and
should be avoided whenever pos-
sible!
A
Also activated when the door is opened.
Related information
Starting the vehicle (p. 426)
•
Adjusting the steering wheel (p. 193)
•
Jump starting using another battery (p. 466)
•
Selecting ignition mode (p. 430)
•
STARTING AND DRIVING
429
* Option/accessory.