Advertisement
INSTRUCTION MANUAL
IMPORTANT
Ensure that any stored petrol/oil mixture is clearly marked in a separate appropriate canister for a
maximum of 30 days if not mixed with a fuel additive. If the machine is not going to be used for a long
period, drain the mixture from the fuel tank, start the engine and drain the carburettor of any remaining
fuel. (See Maintenance for further instruction). Dispose of any unwanted 2-stroke mixture at an authorised
recycling point.
FUELLING THE MACHINE
Place the machine onto a solid flat surface, ensuring the engine is not running.
1. Unscrew the fuel cap thoroughly, but do not remove it from machine.
2. Fill your fuel tank with a 40:1 Petrol: Two-stroke synthetic or semi synthetic oil mixture ratio to 80% of the
fuel tank capacity (480ml).
3. Fasten the fuel tank cap securely being careful not to cross-thread and wipe up any fuel spillage around
the unit. If the machine has continued leaks, the product should not be started.
Fuel and its vapors are extremely flammable and explosive. Fire or explosion can cause severe burns or
OILING THE MACHINE (CHAINSAW OIL)
The saw chain requires constant lubrication to ensure it remains fully effective and does not overheat and
blunt prematurely.
1. Unscrew the oil tank cap.
2. Fill with chainsaw oil. Do not overfill.
3. Fasten the oil tank cap securely being careful not to cross-thread and wipe up any fuel spillage around the
unit. If the machine has continued leaks, the product should not be started.
18
2. Oil Tank Opening
WARNING
death.
1. Fuel Tank Opening
Advertisement
