Connecting The Air And The Mains Cable - Beko B32 D 560 B Brief Instruction

CONNECTION/PREPARATION

Connecting the air and the mains cable

1 2
SATELLITE
ANT-IN
1 For digital satellite stations (DVB-S/
S2) plug the cable of satellite antenna
into the antenna socket SATELLITE on
the television set;
and / or
2a For terrestrial digital stations (DVB-T)
plug the cable of the rooftop, indoor
antenna (active or passive indoor
antenna with its own power supply)
into the antenna socket ANT-IN on the
television set;
or
2b For digital stations of the cable TV
network (DVB-C), plug the antenna
cable into the antenna socket ANT-IN
on the television set;
or
2c For analogue stations plug the
antenna cable into the antenna socket
ANT-IN on the television set.
AC IN
3
EN / 11
- - ---------------------------------------------------
4
Note:
When connecting an indoor antenna
7
you may have to try it out at different
positions until you get the best
reception.
3 Plug the mains cable into the AC-IN
socket.
4 Plug the mains cable into the wall
socket.
Notes:
Make sure that the adaptor is
7
connected to the TV before plugging
in the power cable
Only plug the device into the mains
7
socket after you have connected the
external devices and the antenna.
Do not use an adapter plug or
7
extension cable which does not meet
the applicable safety standards. Do
not tamper with the power cable.