Connecting The Air And The Mains Cable - Beko B43L 5845 4B User Manual

CONNECTION/PREPARATION

Connecting the air and the mains cable

3
1 For digital satellite stations (DVB-S/S2) plug
the cable of satellite antenna into the an-
tenna socket RF IN-S2 on the television set;
and / or
2a For terrestrial digital stations (DVB-T) plug
the cable of the rooftop, indoor antenna
(active or passive indoor antenna with its
own power supply) into the antenna socket
RF IN-T2 on the television set;
or
2b For digital stations of the cable TV network
(DVB-C), plug the antenna cable into the
antenna socket RF IN-T2 on the television
set;
or
2c For analogue stations plug the antenna
cable into the antenna socket RF IN-T2 on
the television set.
Television / User Manual
-----------------------------------------------------
1
2
Note:
When connecting an indoor antenna you
7
may have to try it out at different positions
until you get the best reception.
3 Plug the mains cable into the wall socket.
Notes:
Make sure that the adaptor is connected to
7
the TV before plugging in the power cable
Only plug the device into the mains socket
7
after you have connected the external
devices and the antenna.
Do not use an adapter plug or extension
7
cable which does not meet the applicable
safety standards. Do not tamper with the
power cable.
11 / 57 TR