Flush Mounting With Junction Box - HIKVISION DS-KIS101-P/FLUSH User Manual

4.1.4 Flush Mounting with Junction Box

The device supports flush mounting with junction box.
Before You Start
Make sure all related equipments are power-off during the installation.
●
Accessories that you need to prepare for installation: Junction box and mounting
●
template.
Tools that you need to prepare for installation: Drill (ø2.846) and gradienter.
●
Purchase the protective shield before installation.
●
Steps
1. Cave the installation hole and pull the cable out.
Note
The dimension of the installation hole should be larger than the junction box.
2. Stick the mounting template into the installation hole.
3. Insert the junction box into the hole and fix it with 4 screws according to the
screw holes.
4. Insert the door station into the junction box, and fix it with set screw.
Video Intercom Analog Bundle User Manual
Figure 4-4 Surface Mounting without Gang Box
17