Figure 37. Installing the system fan
6. Connect the system fan cable to the system fan connector on the system board. See "System board" on
page 4.
7. Reinstall the computer cover and reconnect the cables. For details, see "Completing the parts
replacement" on page 64.
Replacing the heat sink
Attention: Do not open your computer or attempt any repairs before reading the Important Product Information
Guide.
Replacing the heat sink for 10TF, 10TG, 10TH, 10TJ, and 10TK models
1. Remove any media from the drives and turn off all connected devices and the computer.
2. Disconnect all power cords from electrical outlets and disconnect all cables that are connected to the
computer.
3. Remove the computer cover. For details, see "Removing the computer cover" on page 28.
4. Replace the heat sink.
a. Remove the heat sink.
36
M625q User Guide and Hardware Maintenance Manual