Table of Contents
Advertisement
4.8
Monitor menu
This menu displays the system temperature, fan speed, and power status. You can also
change the fan settings in this menu.
Fan Speed Control [Generic Mode]
Allows you to select the power-on state for the NumLock.
Configuration options: [ Generic Mode] [High Speed Mode] [Full Speed Mode] [Manual Speed
The following item appears only when you set the Fan Speed Control to [Manual Speed
Mode].
REAR_FAN1 / CPU_FAN1 / FRNT_FAN1-3 Duty [50]
Allows you to set the desired POST Report waiting time from 1 to 10 seconds. Use the
<+> or <-> to adjust the value. The values range from 10 to 100.
4-36
Mode]
Chapter 4: BIOS Setup
Advertisement
Table of Contents
