TP-Link TL-SG108PE Installation Manual

Installation Guide
8-Port Gigabit Easy Smart Switch with 4-Port PoE
TL-SG108PE
Connection
PoE Ports (1-4)
PoE Devices
IP Camera AP
Configuration
The switch is plug and play. To manage the switch, you can use the
Web-based GUI or the configuration utility.
The utility is provided on the resource CD and only supported on
Windows now.
Using the Web-based GUI
1. Prepare your computer with a static IP address 192.168.0.x ("x" ranges
from 2 to 254), and a subnet mask 255.255.255.0.
2. Visit the Web-based GUI with the default IP address of the switch
http://192.168.0.1, and log in with
password. Then configure the switch on the GUI.
Using the configuration utility
1. Insert the resource CD into a computer connected to the switch.
IP Phone
admin as both user name and
LED Explanation
Power
On: Power on
Off: Power off
Power
PoE Max
On: 46W ≤ Total power supply < 55W
Flashing: Total power supply = 55W
PoE Max
Off: Total power supply < 46W
DC Power Adapter
Ethernet Ports (1-8)
Router
LAN Port
Note: 1. PoE ports can also connect to non-PoE devices, but only transmit data.
2. Maximum PoE power is 15.4W for each PoE port and 55W for all PoE ports.
2. The resource CD home screen will
appear. If not, double click
on the resource CD. Then click
Easy Smart Configuration Utility
home screen and follow the prompts to
install the program.
3. Double click the icon
desktop, and the utility home page
displays a list of TP-LINK Easy Smart
Switches on the local network.
4. Make sure the switch that you want to manage is in the same subnet as
your computer. You can click
5. Double click the switch that you want to configure. Next enter the
username and password (both admin) for it. Then use the utility to
configure the switch.
For more details, see the
Utility User Guide on the resource CD.
Link/Act and PoE Status
Link/Act(Port 1-8)
On and Green:
On and Yellow:
Flashing: Transmitting/receiving data
PoE Status(Port 1-4)
On: Providing PoE power
Flashing: PoE fault
Off: Not providing PoE power
AC Power Cord
Internet
WAN Port
AutoRun.exe
Install
on the
on the
to configure the switch IP address.
User Guide and the Easy Smart Configuration
Running at 1000Mbps
Running at 10/100Mbps