Foreword; Introduction - Wallenstein BX52RI Operator's Manual

Foreword

1. Foreword

1.1 Introduction

Congratulations on your choice of a Wallenstein BXR Series
Roller Feed Chipper !
Wallenstein BXR Series Wood Chippers are designed to chip and
chop scrap lumber, small trees, brush, limbs and other wood
debris. The chipped material is fine enough to be composted or
used in a variety of ways.
This manual covers the following BXR Series models:
• BX52R
• BX52RI (P3 PULSE option, S/N 152R819 to 152R998)
• BX72R
• BX72RI (P3 PULSE option, S/N 172R489 to 172R577)
• BX102R
• BX102RI (P3 PULSE option, S/N 1102R400 to 1102R406)
• BX102RPI (Winch and P3 PULSE options, S/N 1102R400
to 1102R406)
Safe, efficient and trouble-free operation of this Wallenstein
product requires that anyone using or maintaining the machine
reads and understands the Safety, Operation, Maintenance
information contained within the Operator's Manual.
Model Configuration
BX102RPI
Series Chipper Design
Capacity Iteration
(inches)
www.wallensteinequipment.com
Keep this manual handy for frequent reference and to pass on
to new operators or owners. Call your Wallenstein dealer or
the distributor if you need assistance, information or additional
copies of the manuals.
Units of measurement in Wallenstein Equipment technical
manuals are written as:
US Customary (SI metric)
Wallenstein Equipment Inc. • © 2021. All rights reserved.
No part of this work may be copied, reproduced, replaced,
distributed, published, displayed, modified, or transferred in
any form or by any means except with the prior permission of
Wallenstein Equipment Inc.
Do not attempt to start or operate the machine
without thoroughly reviewing this manual for
safe and proper operation.
Always keep this manual with the machine.
Roller Feed Winch, Top
Roller Lift
(options)
2
BX52R, BX72R, BX102R
3 PH Roller-feed Chipper
WARNING!
P3 Pulse
(option)
W034