Pentair MYERS VRS20-21TRE Installation And Service Manual

VRS20-21TRE Shown

MODELS VRS20-21TRE

and VRS20-21TREX

Engineered for quick and easy replacement of existing

progressive cavity grinder systems.

RETROFIT SYSTEMS

INSTALLATION AND SERVICE MANUAL

Fully assembled. Uses existing ball valve and latch. Uses existing underground wiring and alarm panel

NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible

party who maintains the system.

Table of Contents

Need help?

Do you have a question about the MYERS VRS20-21TRE and is the answer not in the manual?

Page 1 Fully assembled. Uses existing ball valve and latch. Uses existing underground wiring and alarm panel NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible party who maintains the system. Part # 23833A711 | © 2018 Pentair plc | 01/31/18...
Page 2 GENERAL INFORMATION 4. Lift pre-assembled unit into place using lift rope supplied. Thank you for purchasing your Myers Retrofit System. 5. Guide tabs will line up with existing alignment To help ensure years of trouble-free operation, please brackets. Retrofit system discharge piping should read the following manual carefully.
Page 3 PCF RETROFIT SYSTEM REPLACEMENT PARTS...
Page 4 Pentair Myers will cover only the lower seal and labor thereof for all dual seal pumps. Under no circumstance will Pentair Myers be responsible for the cost of field labor, travel expenses, rented equipment, removal/reinstallation costs or freight expenses to and from the factory or an authorized Pentair Myers service facility.

Myers vrs20-21trex