BassBoss DJ18-MK3 User Manual

BassBoss DJ18-MK3 User Manual

Single 18” powered subwoofer

Advertisement

User
Manual
Single 18"
DJ18-MK3
Powered Subwoofer

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DJ18-MK3 and is the answer not in the manual?

Questions and answers

Summary of Contents for BassBoss DJ18-MK3

  • Page 1 User Manual Single 18” DJ18-MK3 Powered Subwoofer...
  • Page 2: Table Of Contents

    The ethernet connectivity in conjunction with the DSP board The DJ18-MK3 is a premium-quality subwoofer which delivers deep bass at levels far higher than allows signal to be sent via Milan AVB. Firmware updates will provide access to this feature.
  • Page 3: Quick Start Guide

    It’s recommended to run balanced signal cables to minimize the chance of noise and ground-loop hum. BASSBOSS top and their outputs will be phase-coherent. This means no cancellations and no gaps in The incoming signal should be unprocessed because all the necessary processing is done in the built- the response at the crossover frequency, regardless of which preset is selected.
  • Page 4: Operation And Controls

    When not enough output is available from the sub(s), using a preset combination with overlap can help other BASSBOSS powered speakers. provide a little more bass level but it does limit the maximum level of the tops due to the added demand for low-frequencies from the tops.
  • Page 5: Power Distribution

    High-pass and low-pass filters with included phase compensation. Connect no more than one 5000W or two 2500W subwoofer amplifiers to a single 20A circuit. If you need to share circuits don’t exceed two BASSBOSS single-driver subwoofers or one double-driver Preset 1 - 30 Hz - 70 Hz subwoofer along with one or two top speakers on the same circuit.
  • Page 6: Specifications

    Area of *Peak output is calculated using “industry standard” techniques. These calculation methods create theoretical specifications Audience Reduced that are inflated over what can actually be achieved. BASSBOSS real world output specifications are provided as Area “Maximum SPL” ratings, which reflect actual measured output levels. Bass Level Our proactive philosophy causes specifications to be subject to change whenever improvements are made.
  • Page 7 For installation purposes BASSBOSS strongly recommends that this product be installed by a qualified, the failed unit, together with its original sales receipt or other proof of purchase, to BASSBOSS or an professional installer who can ensure correct installation and certify that it is installed in compliance Authorized Service Facility.
  • Page 8 Manufacturer True Lee Loudspeakers | BASSBOSS 2028 E Ben White Blvd. #240-8220 Austin TX 78741 We declare, under our sole responsibility, that to the best of our knowledge to which this declaration relates, our products are in conformity with the applicable requirements.
  • Page 9 Single 18” DJ18-MK3 Powered Subwoofer Need more assistance? We’re here to help. bassboss.com/support...

Table of Contents