Table of Contents
Advertisement
4.
Unpacking the Appliance
Make sure the ship kit includes the correct installation hardware shown below:
n
Eight Phillips flat head screws
n
Two power cords
Eight Phillips
flat head screws
A pair of 4-post rack sliding chassis rail and rack assemblies
n
Complete chassis and adjustable rack rail assembly (inside view)
Inner fixed chassis rail attaches to the appliance
(To be removed from the adjustable rack rail assembly
and will attach directly to the appliance)
Complete chassis and adjustable rack rail assembly (outside view)
A
A
Inner fixed chassis rail
B
Chassis rail locking pin
C
Chassis rail release button
D
Adjustable rack rail, front bracket
E
Adjustable rack rail, center sliding rail
F
Adjustable rack rail, rear bracket
INSIGHT DLP SENSOR 910 Appliance Hardware Installation Guide
Two power cords
which will be installed and attached to the front and back of the rack)
B
C
D
NOTE:
supplied with your specific
rack if different from the
hardware supplied in this kit.
Adjustable rack rail assembly
E
F
www.insightdlp.com
Use the hardware
Page 5
Advertisement
Table of Contents
