Front Panel Operation - INSIGHT DLP SENSOR 910 Hardware Installation Manual

9.

Front Panel Operation

Press the Power Button once to power the appliance on.
A A B C B C
G G
A System ID Button with Integrated LED
B NMI Button (recessed, tool required for use)
C SPAN Activity LED
D System Cold Reset Button
E Hard Drive Activity LED
F Power Button with Integrated LED
G DLP Activity LED
INSIGHT DLP SENSOR 910 Appliance Hardware Installation Guide
Serial Number Slot Serial Number Slot Serial Number Slot
D D E E F F
System System
Status LED Status LED
F Front Panel Illustration ront ront
See Detail Chart See Detail Chart
USB Ports USB Ports
Video Port Video Port
System Status LED
There is a bi-color (Green/Amber) LED on the Front Panel (shown on
the left). The LED operation is defined in the following table.
LED Color System State
OFF
System is not operating
GREEN Solid - On
GREEN ~1 Hz blinking
AMBER ~1 Hz blinking
AMBER Solid - On
P anel Illustra ti on
2 4
1 3
ID
Criticality
Not ready
OK
Degraded - system is
operating in a degraded state
although still functional, OR
system is operating in a
redundant state but with an
impending failure warning
Non-critical - system is
operating in a degraded
state with an impending
failure warning, although
still functioning
Critical, non-recoverable -
system is halted
www.insightdlp.com Page 10