Checking The Play Information - Sony DVP-NS999ES Operating Instructions Manual

Checking the Play
Information
You can check information such as the bit
rate or the disc layer that is being played.
Scroll key
DISPLAY
Checking the play information of
a DVD (ADVANCED)
1
Press DISPLAY during playback.
The Control Menu is displayed.
2
Press X/x to select
(ADVANCED), then press ENTER.
The options for "ADVANCED" appear.
1 2 ( 2 7 )
1 8 ( 3 4 )
T 1 : 3 2 : 5 5
BIT RATE
OFF
BIT RATE
LAYER
3
Press X/x to select items.
For each item, see "Display of each item"
below.
• BIT RATE: displays the bit rate.
• LAYER: displays the layer and the
pick-up point.
4
Press ENTER.
To turn off the ADVANCED display
Select "OFF" in step 3.
X/x
ENTER
PLAY
DVD VIDEO
BIT RATE
384 kbps
Mbps
0 5 10
To turn off the Control Menu
Press DISPLAY repeatedly until the Control
Menu is turned off.
Display of each item
By pressing DISPLAY repeatedly, you can
display either "BIT RATE" or "LAYER,"
whichever was selected in "ADVANCED."
BIT RATE
BIT RATE
384
0 5 10
Bit rate refers to the amount of video/audio
data per second in a disc. While playing a
disc, the approximate bit rate of the playback
picture is displayed as Mbps (megabits per
second) and the audio as kbps (kilobits per
second). The higher the bit rate, the larger the
amount of data. However, this does not
always mean that you can get higher quality
pictures or sounds.
LAYER
Appears when the DVD
has dual layers
Indicates the approximate point where the
disc is playing.
If it is a dual-layer DVD, the player indicates
which layer is being read ("Layer 0" or
"Layer 1").
For details on the layers, see page 88 (DVD
VIDEO).
Audio
kbps
Mbps
Video
,continued
55