Sony DVP-NS999ES Operating Instructions Manual page 32

6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
BLACK LEVEL:
BLACK LEVEL
COMPONENT OUT:
4:3 OUTPUT:
7
Press X/x to select the setting that
matches your TV type.
If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 77)
If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 77)
8
Press ENTER.
The Setup Display for selecting the type
of video signal appears.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
BLACK LEVEL :
BLACK LEVEL
COMPONENT OUT:
4:3 OUTPUT:
9
Press X/x to select the type of
signals you wish to output to your
TV.
Select "PROGRESSIVE" only if you
have made video pattern C (page 21) and
wish to view progressive video signals.
Interlace format TV (standard TV)
• INTERLACE (pages 78)
Progressive format TV
• PROGRESSIVE (pages 78)
32
4:3 LETTER BOX
4:3 LETTER BOX
4:3 PAN SCAN
16:9
: ON
( COMPONENT OUT )
INTERLACE
FULL
4:3 LETTER BOX
ON
JACKET PICTURE
ON
: ON
( COMPONENT OUT )
INTERLACE
INTERLACE
PROGRESSIVE
10
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
Is this player connected to an amplifier
(receiver)? Select the type of jack you
are using.
YES
AUDIO OUTPUT L/R
DIGITAL OUTPUT
DIGITAL & 5.1CH OUTPUT
NO
11
Press X/x to select the type of
jack (if any) you are using to
connect to an amplifier (receiver),
then press ENTER.
Choose the item that matches the audio
connection you selected on pages 26 to
29 ( through
A
A
• If you connect just a TV and nothing
else, select "NO." Quick Setup is
finished and connections are complete.
B-1 C-1
• Select "AUDIO OUTPUT L/R." Quick
Setup is finished and connections are
complete.
B-2 C-2 D-2
• Select "DIGITAL OUTPUT." The Setup
Display for "DOLBY DIGITAL" appears.
or both
D-1
• Select "DIGITAL & 5.1CH OUTPUT."
The Setup Display for "DOLBY
DIGITAL" appears.
12
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 27 to
29 ( through
B
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO FILTER:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
48kHz/96kHz PCM:
).
D
and
D-2
D-1
).
D
OFF
STANDARD
SHARP
DOLBY SURROUND
ON
D-PCM
D-PCM
DOLBY DIGITAL