Jeep JAT User Manual page 9

Any changes to its construction may compromise the behaviour, safety and stability of the
electrically power assisted cycle and may cause an accident.
Any other types of use, or any extensions of use beyond the one intended, do not correspond to the
intended use attributed by the manufacturer and the latter, therefore, disclaims all liability for any
resulting damage.
The autonomy of the battery supplied with the electrically power assisted cycle and, therefore, the
relevant distance data estimated in km, may vary significantly depending on the specific mode of
use (total load transported, how hard the rider pedals the bike, level of electric pedal assistance
detected, how often the rider departs and restarts), the mechanical and electrical conditions of the
product (tyre pressure and wear, battery efficiency level) and external influences (slopes and road
surface, atmospheric conditions).
Before each use, carefully check that the brakes are working correctly and are not worn; check the
tyre pressure, the wear of the wheels and battery charge status.
Regularly check that the tightness of the various elements secured by bolts. The nuts and all
the other self-tightening parts can become loose so, these components need to be periodically
checked and tightened.
Like all mechanical components, the item is subject to wear and tear. Different materials
and components may react to wear or stress fatigue in a variety of ways. If the useful life of a
component is exceeded, it could break unexpectedly and injure the user. Any cracks, scratches or
changes in colour in areas subject to high levels of stress indicate that the life of the component
has been reached and must be replaced.
CAUTION
Place of use
• The electrically power assisted cycle can be used outdoors providing there are no adverse
weather conditions (rain, hail, snow, strong wind, etc.).
• Maximum permissible temperature: +40°C
• Minimum permissible temperature: +0°C
• Maximum permissible humidity: 80%
08