NITECORE i4000R - Tactical Flashlight Manual

Features

• Utilizes 4 x CREE XP-L2 V6 LEDs with a max output of 4,400 lumens
• An optical system combined with crystal coating and "Precision Digital Optics Technology" (PDOT)
• Maximum beam intensity of 13,300cd and maximum throw of 230 meters
• Highly efficient constant current circuit provides a stable output for up to 380 hours
• Dual tail switches enable intuitive operations for tactical applications
• 5 brightness levels and 1 special mode available
• STROBE READY™ Technology to enable a quick access to STROBE Mode
  (Patent No.: ZL201320545349.4)
• STROBE Mode uses randomly changing frequencies for stronger dizzying effects
• Intelligent Li-ion battery charging circuit with a USB-C port
• NITECORE 21700 Li-ion battery included (NL2150HPi 5,000mAh)
• Dual indicators are available to indicate the battery power
• The indicators can display the battery voltage (±0.1V)
• Incorporated Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6)
• Optical lenses with double-sided scratch resistant coating
• Constructed from aero grade aluminum alloy
• HA III military grade hard-anodized finish
• Rating in accordance with IP68 (2 meters submersible)
• Impact resistant to 1 meter

Specification

Accessories

• NITECORE 21700 Rechargeable Li-ion Battery (NL2150HPi 5,000mAh),
• USB-C Charging Cable,
• Clip,
• Lanyard,
• Spare O-ring,
• CR123 Battery Magazine,
• Tactical Holster NTH20

Battery Options

The i4000R is only compatible with NITECORE 21700 i Series batteries with an output over 15A and CR123/RCR123 batteries.

Note:

1. DO NOT attempt to use the i4000R to charge CR123/RCR123 batteries.
2. The i4000R is NOT compatible with conventional 21700/18650 batteries.

Battery Installation

Charging

Operating Instructions

Battery Installation
nsert the battery(s) as illustrated and screw to tighten the tail cap.

Note: After the battery insertion, the head power indicator will flash to indicate the battery voltage. Please refer to the "Power Indication" section of this manual for more details.

1. Ensure the battery(s) is/are inserted with the positive end towards the head. The product will not work if the battery(s) is/are incorrectly inserted.
2. DO NOT direct the beam to the naked eyes.
3. When the power level is low, please stop using the product and replace or recharge the battery to prevent damage to the battery.
4. When the product is kept in a backpack or left unused for prolonged time, please remove all batteries to prevent accidental activation or battery leakage.
5. DO NOT submerge the light into any liquid when it is hot. Doing so may cause irreparable damage to the light due to the difference of air pressure inside and outside of the tube.

Charging Function

The i4000R is equipped with an intelligent charging system. As illustrated, rotate the protective cover to reveal the charging port after inserting the battery, and then use the USB cable to connect an external power supply (e.g. a USB adapter or other USB charging devices) to the charging port to begin the charging process.

• During the charging process, the tail power indicator will flash slowly to inform the user.
• When the battery is fully charged, the i4000R will cease the charging process and the tail power indicator will become steadily turned on to inform the user.
• When the charging status is abnormal (e.g. the battery is broken/inserted incorrectly), the i4000R will cease the charging process and the tail power indicator will flash quickly to inform the user.
• When the light is on, connecting to a power source will automatically turn the light off. The light will return to its previous status and the tail power indicator will flash to show the battery voltage when it is disconnected from the power source.
• The charging time for a 21700 Li-ion battery (5,000mAh) is approx. 4 hours 15 minutes. (Charged via the 5V/2A adapter)

Tactical Momentary Illumination

Half press and hold the Power Button to turn on the light momentarily. Release to turn it off.

On / Off

On: When the light is off, press the Power Button until a click sound is heard to turn it on.
Off: When the light is on, press the Power Button until a click sound is heard to turn it off.
(The i4000R has mode memory. When reactivated, the flashlight will automatically access the previous memorized brightness level or STROBE Mode.)

Brightness Levels

When the light is on, short press the Mode Button to cycle through the following brightness levels: ULTRALOW – LOW – MID – HIGH.

TURBO Brightness Level

When the light is on, press and hold the Mode Button to directly access TURBO of 4,400 lumens. Release to return to the previous status.

STROBE Mode

• When the light is off, press and hold the Mode Button to access the STROBE Mode. Release to return it off.
• When the light is on, triple press the Mode Button to access the STROBE Mode. Short press the Mode Button to return to the previous status.

Power Indication

• When the battery is inserted, the head power indicator will flash to show the battery voltage (±0.1V).
• When it is disconnected from the power source during the charging process, the tail power indicator will flash to show the battery voltage (±0.1V).
  For example, when the battery voltage is at 4.2V, the power indicator will flash 4 times followed by a 1.5-second pause and 2 more flashes. Different voltages represent the corresponding remaining battery power levels:
  
• When the light is on, the head power indicator will indicate the remaining battery power.
  1. Being steadily turned on indicates that the power is above 50%;
  2. Flashing slowly indicates that the power is below 50%;
  3. Flashing quickly indicates that the power is below 10%.

Note:

1. When using two CR123/RCR123 in series, the indicator will show the average voltage between the two batteries.
2. The batteries should be replaced or recharged when the output appears to be dim or the flashlight becomes unresponsive due to low power.

ATR (Advanced Temperature Regulation)

The integrated ATR technology regulates the output of the i4000R according to the working condition and ambient environment to maintain the optimal performance.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant.

Technical Data

FL1 STANDARD	TURBO	HIGH	MID	LOW	ULTRALOW	STROBE
	4,400 Lumens	1,100 Lumens	330 Lumens	50 Lumens	2 Lumens	4,400 Lumens
	*30min	2h 15min	7h 45min	40h	380h	─
	230m	115m	61m	25m	4m	─
	13,300cd	3,330cd	930cd	160cd	4cd	─
	1m (Impact Resistance)
	IP68, 2m (Waterproof and Submersible)

Note: The stated data is measured in accordance with the international flashlight testing standard ANSI/PLATO FL 1-2019, using 1 x 21700 Li-ion battery (5,000mAh) under laboratory conditions.
The data may vary in real world use due to different battery usage or environmental conditions.

• The runtime for TURBO mode is tested without the temperature regulation.
• TURBO Availability: The TURBO level is only accessible when using a 21700 i Series battery with an output over 15A. It is inaccessible when using CR123/RCR123 batteries.

Warranty Service

All NITECORE^® products are warranted for quality. Any DOA / defective product can be exchanged for a replacement through a local distributor/dealer within 15 days of purchase. After that, all defective / malfunctioning NITECORE^® products can be repaired free of charge within 60 months from the date of purchase. Beyond 60 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts. The warranty will be nullified if

1. the product(s) is/are broken down, reconstructed and/or modified by unauthorized parties;
2. the product(s) is/are damaged due to improper use; (e.g. reversed polarity installation)
3. the product(s) is/are damaged due to battery leakage.

For the latest information on NITECORE^® products and services, please contact a local NITECORE^® distributor or send an email to service@nitecore.com

All images, text and statements specified herein this user manual are for reference purpose only. Should any discrepancy occur between this manual and information specified on www.nitecore.com, Sysmax Innovations Co., Ltd. reserves the rights to interpret and amend the content of this document at any time without prior notice.

SYSMAX Innovations Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com;
Address: Rm 2601-06, Central Tower, No.5 Xiancun Road,
Tianhe District, Guangzhou, 510623, Guangdong, China

Please find us on facebook: NITECORE Flashlight
Thanks for purchasing NITECORE!

Videos

NITECORE i4000R 4400 Lumen, USB-C Rechargeable Tactical Flashlight Video

Documents / Resources

References

• http://www.nitecore.com

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download NITECORE i4000R - Tactical Flashlight Manual