Sleep Operation - Mitsubishi Electric MSZ-YE09VA-H1 Operating And Installing Instructions

Sleep Operation

If you want to sleep, please select the function in Cooling mode.
When selecting Sleep mode
Press button when the unit is operating.
1
Fan speed is changed to Auto. Changing fan speed enables you to quit Sleep mode.
Press button or button to set a temperature in Sleep mode.
2
After setting of the temperature in Sleep mode, press
When quitting Sleep mode
Press button again.
3
Sleep mode can be quitted by pressing button or changing operation mode.
Sleep mode can be used together with TIMER ON/OFF.
Sleep mode description
At the time of pressing button, the display darkens, fan speed is changed to Auto mode automatically, and the air conditioner
operates with low noise.
·When the air conditioner operates in Sleep mode, cooling or heating capacity is not enough, thus, you can quit Sleep mode.
Cooling/Heating mode
■The air conditioner operates at the temperature set prior to pressing Sleep mode button, about 30 minutes later, the
temperature is changed to that set in Sleep mode.
Change of the set temperature
The temperature set prior to pressing
button (about 30 minutes)
Press button
If ON-Timer is enabled to activate Sleep mode, the air conditioner will operate at the temperature set in Sleep mode.
Set temperature for ON-Timer
Set temperature in
Sleep mode
ON-Timer combines with Sleep mode
button again to show the temperature set in previous mode.
Set temperature in
Sleep mode
Initial set temperature for the remote controller
If the remote controller is reset after change of batter-
ies, the setting for initial temperature is as follows:
Sleep mode (cooling): 28℃
Sleep mode (heating): 17℃
Set temperature in Sleep mode
In Cooling mode, it is suggested that you'd better set a
temperature 1℃~2 2 ℃ higher than current temperature to
avoid catching a cold in sleep; In Heating mode, 5℃~6 6 ℃
lower than current temperature to make a sound sleep.
39