Adjusting Setup Items - Menu - Sony Xplod DSX-S200X Operating Instructions Manual

Adjusting setup items — MENU
1
Press and hold the multi way encoder.
2
Rotate the multi way encoder to select
the desired menu item, then press it.
3
Push the multi way encoder up/down
to select the setting, then press it.
The setting is complete.
4
Press (BACK).
The setting is complete and the display
returns to normal reception/play mode.
The following items can be set (follow the page
reference for details):
Setup
Clock Adjust (page 6)
CT (Clock Time) (page 12)
Beep
Activates the beep sound: "on," "off."
RM (Rotary Commander)
Changes the operative direction of the rotary
commander controls: "NORM," "REV."
Auto Off
Shuts off automatically after a desired time
when the unit is turned off: "NO," "30sec
(seconds)," "30min (minutes)," "60min
(minutes)."
DEV Inside Alert
Activates the Device Inside Alert function:
"off," "on."
Display
Demo (Demonstration)
Activates the demonstration: "on," "off."
Image
Sets various display images.
– "All": to display all images.
– "Movie": to display a movie.
– "SA 1 – 3, All": to display the Spectrum
Analyzer.
– "Wall.P 1 – 4, All": to display a wallpaper.
– "off": to not display any image.
Information
Displays the items (depending on the source,
etc.): "on," "off."
Dimmer
Changes the display brightness.
– "Auto": to dim the display automatically when
you turn lights on. (Available only when the
illumination control lead is connected.)
– "on": to dim the display.
– "off": deactivate the dimmer.
Illumination
26
Changes the illumination color: "Blue," "Red."
Auto Scroll
Scrolls long items automatically: "on," "off."
Play Mode
Repeat (page 15, 20)
ZAPPIN Tone* 1
Has the beep sound between track passages:
"on," "off."
ZAPPIN Time*
1
Selects the playback time for the ZAPPIN
function: "1 (about 6 seconds)," "2 (about 15
seconds)," "3 (about 30 seconds)."
Local (Local Seek Mode)
– "on": to only tune into stations with stronger
signals.
– "off": to tune normal reception.
Mono* 2 (Monaural Mode)
Selects monaural reception mode to improve
poor FM reception: "on," "off."
BTM (page 11)
*1 When USB/SensMe™/iPod source is activated.
*2 When FM is received.