Table of Contents
Advertisement
LANCOM 7100 VPN – LANCOM 9100 VPN
Chapter 6: Providing dial- in access
6.1.3
Settings for NetBIOS routing
When working with NetBIOS, the only information required is the name of a
Windows workgroup in the LAN used by the router.
6.2
Settings on the dial-in computer
6.2.1
Dialing-in via VPN
For dialing-in to a network via VPN, a computer needs:
LANCOM Systems offers you a 30-day test version of the LANCOM Advanced
VPN Client on the CD supplied. A precise description of the VPN client and
notes on its setup are also to be found on the CD.
The Wizard then requests the parameters that were specified when setting up
the RAS access in the LANCOM Router.
6.2.2
Dialing-in via ISDN
A number of settings are required by the dial-in computer. This example is
based on a Windows computer.
48
The connection is not established automatically. The RAS user first has
to manually establish a connection to the LANCOM Router with the
help of Dial-Up Networking. Once the connection has been estab-
lished, the computer can access and search the other network (click
on Search
Computer, do not use the Network Neighborhood).
Internet access
A VPN client
Dial-Up Networking (or any other PPP client) installed correctly.
Network protocol (TCP/IP, IPX) installed and associated with the dial-up
adapter
New connection in Dial-Up Networking with the phone number of the
router
Terminal adapter or ISDN card set up for PPPHDLC
PPP selected and the dial-up server type, 'Activate compression in soft-
ware' and 'Request encrypted password' switched off.
Select the required network protocols (TCP/IP)
Additional TCP/IP settings
Assignment of IP address and name server address activated
Advertisement
Table of Contents
