Status Displays And Interfaces; Front - Lancom 7100 VPN Manual

2.3

Status displays and interfaces

Meanings of the LEDs
In the following sections we will use different terms to describe the behaviour
of the LEDs:
2.3.1

Front

The LANCOM Routers are equipped with the following status displays on the
front panel:
LANCOM 7100 VPN
LANCOM 9100 VPN
³
Power This LED provides information on the device's operating state.
Off
Green
Green
Red/green
Red
Blinking means, that the LED is switched on or off at regular intervals in
the respective indicated colour.
Flashing means, that the LED lights up very briefly in the respective col-
our and stay then clearly longer (approximately 10x longer) switched off.
Inverse flashing means the opposite. The LED lights permanently in the
respective colour and is only briefly interrupted.
Flickering means, that the LED is switched on and off in irregular inter-
vals.
blinking
On (perma-
nently)
Blinking alter-
nately
blinking
LANCOM 7100 VPN – LANCOM 9100 VPN
³ · » ¿ ´ ²
Device switched off
Self-test after power-up
Device operational
Device insecure: Configuration password not set
Time or charge limit on online connections has been
reached
Chapter 2: Installation
¶ º
15