Settings For Netbios Routing; Instructions For Lanconfig - Lancom WLC-4006 User Manual

For example, the computer with the name 'pc1.branch.company' (IP
10.0.2.10) will not only be able to access the server of the head office via its
IP address, but also via its name, 'server.head.company'. The only precondi-
tion: the domain of the remote network in the wizard must be specified.
The domain can only be specified in the LANconfig wizard. In

WEBconfig, enter the appropriate information later in the expert con-
figuration. For more information, see the LANCOM reference manual.
Extranet VPN
Finally, one can decide whether access to local stations is permitted. In this
'Extranet VPN' operating mode, the IP stations do not expose their IP address
to the remote LAN, rather they will be hidden behind the VPN gateway's IP
address instead.
Therefore, the stations within the remote LAN cannot access IP stations in the
other LAN directly. For example, if a headquarters. LAN in 'Extranet VPN'
mode is hidden behind its gateway's address '10.10.2.100', and on of its IP
stations (e.g. '10.10.2.13') accesses the IP station '10.10.1.2' of the branch
office, then the branch office.s IP stations deems to be a accessed by
'10.10.2.100'. The true IP address of the accessor ('10.10.2.13') is hidden.
If two LANs shall be coupled in Extranet mode, please ensure to enter the
'outbound' Extranet IP address of the remote site, not its Intranet address.
According to the example, this was '10.10.2.100'. The appropriate netmask
for the Extranet IP address would be '255.255.255.255' then.
7.1.3

Settings for NetBIOS routing

NetBIOS routing can be set up quickly: All that is required in addition to the
information for the TCP/IP protocol used is the name of a Windows workgroup
from in the router's own LAN.
Remote Windows workgroups do not appear in the Windows Network

Neighbourhood, but can only be contacted directly (e.g. via Find
Computers).
7.2

Instructions for LANconfig

Perform the configuration on both routers, one at a time.
Launch the 'Connect two local area networks' wizard. Follow the wizard's
instructions and enter the required information.
LANCOM WLC-4006 - LANCOM WLC-4025
Chapter 7: Linking two networks
97