National Instruments NI Vision CVS-1454 User Manual page 52

Chapter 4 Deployment
When configured to run an inspection, the NI CVS-1450 device can
run autonomously without connection to the host machine. All image
acquisition, inspection, decision making, and I/O occurs on the
NI CVS-1450 device itself. For local monitoring of the inspection, you can
connect a monitor directly to the Video Out connector on the NI CVS-1450
device, as shown in Figure 4-3.
Figure 4-3. NI CVS-1450 Device Connected to a Monitor
At any time, you can reconnect the host machine to the NI CVS-1450
device and remotely monitor progress.
© National Instruments Corporation 4-3 NI CVS-1450 Series User Manual