Bagging the Clippings
Use the grass bag when you want to collect grass and leaf clippings from the lawn.
If the side-discharge chute is on the machine, remove it and lock the side-discharge deflector; refer to
the Side-Discharge Chute (page
Installing the Grass Bag
1.
Raise and hold up the rear deflector and unlock the rear plug (A of
2.
Pull out the rear plug (B of
3.
Hang the upper front edge of the bag from the grass-bag pins on the notches of the handle brackets
(C of
Figure
16).
4.
Lower the rear deflector.
15).
Figure
16).
Figure 16
13
Figure
16).
Removing
g240403