Recycling The Clippings; Bagging The Clippings - Toro 20041 Operator's Manual

Recycling the Clippings

Your mower comes from the factory ready to recycle
the grass and leaf clippings back into the lawn.
If the grass bag is on the mower, remove it (refer to
Removing the Grass Bag on page 9) before
recycling the clippings. If the side discharge chute is
on the mower, remove it and lock the side discharge
door (refer to Removing the Side Discharge Chute on
page 10) before recycling the clippings.
Important: Ensure that
the rear discharge plug
is in place before you
recycle the clippings.

Bagging the Clippings

Use the grass bag when you want to collect grass
and leaf clippings from the lawn.
If the side discharge chute is on the mower, remove it
and lock the side discharge door (refer to Removing
the Side Discharge Chute on page 10) before bagging
the clippings.
Warning
The blade is sharp; contacting the blade can
result in serious personal injury.
Stop the engine and wait for all moving parts to
stop before leaving the operating position.
9
Installing the Grass Bag
1. Raise and hold up
the rear door.
2. Remove the rear
discharge plug.
m-5587
3. Install the bag onto the door rod.
4. Lower the rear door.
Removing the Grass Bag
To remove the bag, reverse the steps above.
3352-568 Rev A
m-6895
m-5587
m-6896