1. Manuals
  2. Brands
  3. LTS Manuals
  4. Intercom System
  5. LTH-D311GY-WIFI
  6. Configuration manual

LTS LTH-D311GY-WIFI Configuration Manual

Network indoor station
Hide thumbs Also See for LTH-D311GY-WIFI:
Table of Contents

Advertisement

Quick Links

Network Indoor Station
Configuration Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LTH-D311GY-WIFI and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for LTS LTH-D311GY-WIFI

Summary of Contents for LTS LTH-D311GY-WIFI

  • Page 1 Network Indoor Station Configuration Guide...
  • Page 2 Network Indoor Station Configuration Guide Legal Information About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons.
  • Page 3 Network Indoor Station Configuration Guide Data Protection During the use of device, personal data will be collected, stored and processed. To protect data, the development of our devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method; for fingerprint device, only fingerprint template will be saved, which is impossible to reconstruct a fingerprint image.
  • Page 4 Network Indoor Station Configuration Guide Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, Caution could result in equipment damage, data loss, performance...
  • Page 5 Network Indoor Station Configuration Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 6 Network Indoor Station Configuration Guide Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

  • Page 7: Table Of Contents

    Network Indoor Station Configuration Guide Contents Chapter 1 Activation........................8 1.1 Activate via NVMS V3......................8 Chapter 2 Local Operation ......................9 2.1 Quick Operation ........................9 2.2 Basic Settings ........................14 2.2.1 Set Indoor Station Network Parameters ..............14 2.2.2 Set Linked Device IP ....................
  • Page 8 Network Indoor Station Configuration Guide 3.2 System Configuration ......................35 3.3 Remote Configuration ......................35 3.3.1 System ........................35 3.3.2 Video Intercom ......................41 3.3.3 Network ........................47 3.4 Person Management ......................52 3.4.1 Organization Management ..................52 3.4.2 Person Management ....................53...

  • Page 9: Chapter 1 Activation

    Chapter 1 Activation 1.1 Activate via NVMS V3 You can only configure and operate the indoor station after creating a password for the device activation. You can also activate the device from the intercom touch screen if needed. Before You Start Default parameters of indoor station are as follows: ●...

  • Page 10: Chapter 2 Local Operation

    Chapter 2 Local Operation 2.1 Quick Operation After device activation, the wizard page will pop up. Steps 1. Choose language and tap Next. Figure 2-7 Language Settings 2. Set password reset methods and tap Next. – Bind an email address. If you forget your admin password, you can reset the password via the reserved email address.
  • Page 11 Figure 2-8 Password Reset Methods 3. Set network parameters and tap Next. – Edit Local IP, Subnet Mask and Gateway parameters manually. – Enable Auto Get IP address, the device will get network parameters automatically. Figure 2-9 Network Parameters 4. Configure the indoor station. 1) Select Device Type as Indoor Station or Indoor Extension.
  • Page 12 3) Set Room No.. 4) Configure advanced settings. Set Community No., Building No. and Unit No. 5) Set Registration Password. 6) Tap Next. Figure 2-10 Indoor Station Settings 5. Enable the Wi-Fi function. Select a Wi-Fi from the list and enter the Wi-Fi's password to get connected.
  • Page 13 Figure 2-11 Wi-Fi 6. Set time and tap Next. 1) Select the Time Zone. 2) Tap Date Format and Time Format to set the time format. 3) Tap Time to set time manually. 4) Enable DST. Set the DST start time, end time and bias time. Figure 2-12 Time Settings 7.
  • Page 14 3) View Server Status. 4) Scan the first QR Code to download the APP of LTS Connect. Scan the second QR Code to add your device to the APP. After adding the device to the APP, you can configure the device remotely.

  • Page 15: Basic Settings

    Figure 2-14 Related Device 1) Tap the indoor extension in the list to link. Note If the indoor extension is inactive, the system will pop up the dialog to activate the device. 2) Edit the network parameters of the indoor extension manually. 10.

  • Page 16: Set Linked Device Ip

    Two ways are available for you to set IP address: DHCP and set IP address manually. 1. Tap Settings → → Configuration and enter admin (activation) password. 2. Tap to enter the network settings page. Figure 2-15 Network Settings 3. Set the network parameters. –...
  • Page 17 1. Tap Settings → → Configuration → to enter the device management page. Note Default admin password is the activation password. Figure 2-16 Device Management 2. Tap Main Door Station to pop up the device information dialog. Figure 2-17 Device Information Set the parameters to set parameters of the door station.

  • Page 18: Set Wi-Fi

    automatically. Or edit the IP address, subnet mask, and gateway manually. Door Lock Parameters After wire the lock with the door station, you can set name and door opening duration according to your needs. Note Up to 2 locks can be configured. Volume Settings Set microphone volume and output volume.

  • Page 19: Set Indoor Station No

    Figure 2-18 Wi-Fi Settings 2.2.4 Set Indoor Station No. Indoor station No. and the indoor extension No. are numbers, which can be dialed by other devices to call the indoor station and the indoor extension in an intercom system. The indoor station No., is composed of the floor No., room No., community No., building No.
  • Page 20 Figure 2-19 Set Indoor Station No. 2. Select Indoor Station to set the room information, live view duration, SIP parameters and password. Room Information You can set room name, floor No., and room No. Tap Advanced Settings to set community No., building No.

  • Page 21: Sip Settings

    Room Information You can set room name and No. Tap Advanced to set the community No., building No., and unit No. if you need. When calling the indoor station and the two devices are in the same building, you can call the room No.

  • Page 22: Add Camera

    1) Tap Registration Password. 2) Create a new SIP registration password and confirm the password. 3) Tap OK. 4. Optional: Enable Compatible with SIP 1.0 Indoor Station and the indoor station (SIP 2.0) can be compatible with SIP 1.0 indoor station. 5.

  • Page 23: Security Settings

    → Configuration, to enter the Admin Password page. 2. Tap Forgot Password. 3. Download the APP of LTS Connect and run NVMS V3 client software. 4. Scan the QR code via LTS Connect. 5. Open the E-mail to get the verification code.

  • Page 24: Synchronize Time

    Figure 2-26 Unlock and Duress Code Settings Page 3. Tap Unlock Password or Duress Code to pop up the password settings dialog box. Unlock Password Create the indoor station's unlock password. If the device has connected to a lock, enter the password to unlock.

  • Page 25: Sound Settings

    Figure 2-27 Time Synchronization 1) Select the Time Zone. 2) Enable Enable NTP. 3) Set the synchronizing interval, enter the IP address/domain of NTP server and port No. Note ● The default unit of synchronizing interval is minute. ● The time zone can be configured as well if the NTP is not enabled. 2.5 Sound Settings Set the ringtone sound, the volume, and the auto answer.
  • Page 26 Figure 2-28 Call Settings 2. Set corresponding parameters. Ringtone There are 3 ringtones by default, and you can custom and import at most 4 ringtones via Batch Configuration Tool or NVMS V3 Client Software. Ringtone Duration: The maximum duration of indoor station when it is called without being accepted.
  • Page 27 Figure 2-29 Main Page Note Before enabling Auto-answer, the function of Leave Message needs to be enabled. Tap Settings → → to enter the shortcut settings page. Eanble Leave Message and go back to calling settings page to enable Auto-answer. Do Not Disturb Device Select All and all devices will not disturb this device.

  • Page 28: Volume Settings

    Touch Sound to turn on the key sound. 2.6 Via the mobile client The device support adding to LTS Connect and configuration remotely via the client. 2.6.1 Link to the Mobile Client Download and link to the mobile client, and you can configure the parameters of the device remotely via mobile client.

  • Page 29: Unlink The Account

    2.6.2 Unlink the Account Remove the account from the mobile client. Steps 1. Tap Settings → → Configuration and enter the admin (activation) password. 2. Tap to enter the system maintenance page. 3. Tap Unlink App Account, and follow the steps on the page. 2.7 System Settings You can format or install TF card, clear the screen, view the version information of the indoor station and reboot the system on the settings page.
  • Page 30 Note ● Make sure your device is connected with the network or the NTP function will not available. ● For details, see Synchronize Time. System Language Tap System Language to change the system language. Note The indoor station supports 19 languages. Brightness Adjustment Tap + or - to adjust the screen brightness.
  • Page 31 Figure 2-32 Restore Page Restore All Restore all parameters of the indoor station to factory settings and the system will reboot automatically. Restore Video Intercom System All devices in the video intercom system (the indoor station and its linked devices) will be restored to the factory settings.

  • Page 32: Output Settings

    2.8 Output Settings You can set and control the connected output devices via the output settings page. You can change the relay’s name, and open duration. You can also set to display the relay button on the main page or not. Steps 1.

  • Page 33: Chapter 3 Remote Operation Via The Client Software

    Chapter 3 Remote Operation via the Client Software The Video Intercom module provides remote control and configuration on video intercom products via the NVMS V3 client software. 3.1 Device Management Device management includes device activation, adding device, editing device, and deleting device, and so on.
  • Page 34 Figure 3-1 Add the Device 4. Optional: Click Online Device, the active online devices in the same local subnet with the client software will be displayed on the Online Device area.

  • Page 35: Modify Network Information

    Note To add online devices to the software, you are required to change the device IP address to the same subnet with your computer first. 1) You can click Refresh Every 60s to refresh the information of the online devices. 2) Select the devices to be added from the list.

  • Page 36: System Configuration

    of the selected device. Note You should enter the admin password of the device in the Password field of the pop-up window to modify the parameters. 3.2 System Configuration You can configure the video intercom parameters accordingly. Steps 1. Click Maintenance and Management → System Configuration → ACS & Video Intercom to enter the system configuration page.
  • Page 37 Information, General, Time, System Maintenance, User, RS-485, and Security. Device Information Click Device Information to enter device basic information page. You can view basic information (the device type, and serial No.), and version information of the device. Figure 3-2 Device Information General Click General to enter device general parameters settings page.
  • Page 38 Figure 3-4 Time Settings Page Select Time Zone, Enable NTP, Enable DST, or SDK Synchronization. Click Save to save the time settings. ● Time Zone: Select a time zone from the drop-down list menu. ● NTP: Click Enable NTP, and enter the server address, NTP port, and synchronization interval. Note The default port No.
  • Page 39 Figure 3-5 System Maintenance ● Reboot: Click Reboot and the system reboot dialog box pops up. Click Yes to reboot the system. ● Restore Default Settings: Click Restore Default Settings to restore the default parameters. All default settings, excluding network parameters, will be restored. ●...
  • Page 40 Czech, Bulgarian, Croatian, Serbian. ○ Rebooting the device is required after you change the system language. User Click User to enter the user information editing page. Select the user to edit and click Edit to enter the user parameter page. Figure 3-6 User Page Note ●...
  • Page 41 Figure 3-7 RS-485 Settings Note For indoor station and main station, there are 3 choices for the working mode: transparent channel, disable, and custom. Security Click Security to enter the page. You can enable SSH or enable HTTPS on this page. Click Save after configuration.

  • Page 42: Video Intercom

    3.3.2 Video Intercom Click Video Intercom on the remote configuration page to enter the video intercom parameters settings: Time Parameters, Password, IP Camera Information, Volume Input and Output Configuration, Ring, Calling Linkage, Relay, and SIP No. Time Parameters Steps 1. Click Time Parameters to enter time parameters settings page. Figure 3-9 Time Parameters 2.
  • Page 43 ● For indoor extension, it only requires setting the maximum live view time. Permission Password Click Permission Password to enter password changing page. Figure 3-10 Permission Password For indoor station, you can change the arm/disarm password. Network Camera Information You can add, delete and edit cameras that can be added to the video intercom products, with two ways of getting stream: direct or URL.
  • Page 44 3. Enter corresponding information (device name, IP address, port No., user name, password, etc.), and click OK. Note Indoor extension does not support this function. Export and Import Added Device Information Steps 1. Click Export to export the added device information file. 2.
  • Page 45 Figure 3-14 Volume Input or Output 2. Slide the slider to adjust the input volume, output volume and speak volume. 3. Click Save to enable the settings. Ring Import Steps 1. Click Ring Import to enter the ring configuration page. Figure 3-15 Ring Import 2.
  • Page 46 Arming Information Click Arming Information to enter the configuring arming information page and view the arming information. Figure 3-16 Arming Information Click Refresh to refresh the arming information. Relay Some indoor station devices support this function. Click Relay to enter the set relay parameters page. Select a relay and click "...
  • Page 47 Figure 3-18 Add SIP Info 3. Select Device Type as Indoor Extension. 4. Enter the required information. Serial No.

  • Page 48: Network

    Enter the device's serial No.. The serial No. is on the rear panel of the device (A fixed-length number with 9 digits). IP Address Enter the device's IP address. Gateway Enter the device's gateway. Subnet Mask Enter the device's subnet mask. Password Enter the device password, ranging from 8 to 16 characters in length.
  • Page 49 Figure 3-19 Local Network Configuration 2. Enter the Local IP Address, IP Address Subnet Mask, Gateway, Port No. and HTTP Port No. 3. Click Save to enable the settings. Note ● The default port No. is 8000. ● After editing the local network parameters of device, you should add the devices to the device list again.
  • Page 50 Figure 3-20 SIP Server Configuration 2. Click Enable. 3. Set the parameters according to your needs. Note ● Up to 32 characters are allowed in the Register User Name field. ● Registration password should be 1 to 16 characters in length. ●...
  • Page 51 1. Click Mobile to enter the configuring the settings page. 2. Enable. Note ● To enable LTS Connect service, you need to create a verification code or change the verification code. ● The verification code should be 6 to 12 letters or numbers, case sensitive. You are recommended to use a combination of no less than 8 letters or numbers.
  • Page 52 Group Network Settings Click Group Network Settings to enter the group network settings page. Figure 3-22 Group Network Settings Device No. Settings Select the device type from the drop-down list, and set the corresponding information. Note ● Device type can be set as indoor station or indoor extension. ●...

  • Page 53: Person Management

    3.4 Person Management You can add, edit, and delete the organization and person in Person Management module. Organization and person management is necessary for the video intercom function. On the main page, click Person to enter the page. Figure 3-23 Personal Management Application The page is divided into two parts: Organization Management and Person Management.

  • Page 54: Person Management

    Add Organization Steps 1. In the organization list on the left, click +Add. 2. Input the organization name as desired. 3. You can add multiple levels of organizations according to the actual needs. 1) You can add multiple levels of organizations according to the actual needs. 2) Then the added organization will be the sub-organization of the upper-level organization.
  • Page 55 2. Set basic person information. 1) Enter basic information: name, tel, birthday details, effective period and email address. 2) Optional: Click Add Face to upload the photo. Note The picture should be in *.jpg format. Click Upload Select the person picture from the local PC to upload it to the client. Click Take Phone Take the person's photo with the PC camera.
  • Page 56 5) Click OK to start importing. Get Person Information from Device If the added device has been configured with person information (including person details, fingerprint, issued card information), you can get the person information from the device and import to the client for further operation. Steps Note This function is only supported by the device the connection mothod of which is TCP/IP when...

Table of Contents