Recommended Maintenance Schedule(S) - Toro 29516 Operator's Manual

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 5 hours
After the first 100 hours
Before each use or daily
Every 25 hours
Every 50 hours
Every 80 hours
Every 100 hours
Every 160 hours
Every 200 hours
Every 250 hours
Every 300 hours
Monthly
Yearly
Yearly or before storage
Maintenance Procedure
• Change the engine oil.
• Check the transmission output shaft nut torque specification.
• Check transmission mount bolt torque.
• Change the auxiliary hydraulic reservoir filter and fluid.
• Change the hydraulic transmission filter and fluid.
• Lubricate the chains.
• Check the engine-oil level.
• Check the safety interlock.
• Check the condition and tension of the chains.
• Check the condition of the sprockets.
• Check the tines.
• Check for loose hardware.
• Clean the engine and the exhaust system area (more often in dry or dirty conditions).
• Clean the grass and debris buildup from the machine.
• Grease the front wheel bearings.
• Grease tine shaft bearings.
• Grease hydro output shaft flanged bearings.
• Clean the foam pre-cleaner (more frequently in dusty conditions).
• Check spark arrester (if equipped).
• Check the air pressure in the drive tires.
• Check the condition and tension of the belts.
• Check the transmission fluid level.
• Remove the engine shrouds and clean the cooling fins.
• Change the engine oil. (more often under severe conditions.)
• Check, clean and gap the spark plug.
• Replace the foam pre-cleaner.
• Change the auxiliary hydraulic reservoir filter and fluid.
• Change the hydraulic transmission filter and fluid.
• Replace the paper air filter (more frequently in dusty conditions).
• Service the battery.
• Grease belt idler pivot.
• Grease front caster hubs.
• Check the torque of the wheel hub bolts.
• Check the torque on the wheel lug nuts.
• Check the torque of the transmission output shaft nut.
• Check transmission mount bolt torque.
• Touch up areas with chipped paint.
29