Polaris Q4000 Owner's Manual page 3

Before You Start: Important Information
• Before installing the Polaris
• New plumbing lines should be flushed out before installing the cleaner.
• The cleaner should not be used to remove plaster dust in new pools.
• Except when checking the wheel RPM, do not handle the cleaner while it is operating.
• Always remove the cleaner before swimmers enter the pool.
• Disconnect the cleaner from the pool wall when cleaning or backwashing the pool filter.
• Always remove the cleaner from the pool before chemical shock treatments.
• After cleaning or backwashing, let the filtration system run for at least five minutes before
re-connecting the cleaner.
For customer service or support:
Zodiac Pool Systems LLC
2882 Whiptail Loop # 100
Carlsbad, CA 92010
1.800.822.7933 | PolarisPool.com
Fluidra Group Australia Pty Ltd
PO Box 7238, Wetherill Park NSW 2164
ABN: 87 002 641 965
1300 763 021 | PolarisPool.com.au
Fluidra NZ Ltd
13 Douglas Alexander Parade
Rosedale, Auckland 0632
NZBN: 942 903 181 70759
0800 807 665 | Fluidra.co.nz
cleaner, make sure the pool filter is clean.
®
Zodiac Pool Systems Canada, Inc.
2-3365 Mainway
Burlington, ON L7M 1A6
1.800.822.7933 | PolarisPool.ca
Zodiac Pool Care Europe
ZA de la Balme - BP 42
31450 Belberaud FRANCE
PolarisPool.eu
3