Westinghouse Halley Owner's Manual page 7

3
1
2
Remove the screws from the two mating holes (1) on the canopy. Loosen
(do not remove) the screws in the mating slots (2) on the canopy.
Quite los tornillos de los dos agujeros coincidentes (1) del dosel. Afloje (no
quite) los tornillos de las ranuras coincidentes (2)del dosel.
MOUNTING BRACKET INSTALLATION
INSTALACIÓN CON SOPORTE DE MONTAJE
2
1
4
Rotate the mounting bracket and remove from the canopy.
Gire el soporte de montaje y sepárelo del dosel.
7
ETL-ES-Halley Smart B-WH21