Items Shipped With The System; Necessary Tools - Trane 18 Series Installer's Manual

Installer's Guide
Items Shipped with the 18 Series Energy Star ® Single Zone System
After unpacking the unit(s), please refrain from disposing of the packaging materials until items listed below
are located. If any of these are missing, please contact the point of sale to obtain these items.
Indoor Unit
1. Refrigeration pipe insulation (short piece)
2. Mounting bracket
3. Installation instructions (may be included in outdoor unit)
4. Flare nuts for connecting refrigerant pipes*
5. Mounting fasteners*
6. Wireless remote controller
Outdoor Unit
1. Installation Manual
2. Warranty Letter
3. Drain pipe connector
*typically packaged in cellophane bubble

Necessary tools

1. Drill
2. Hole Saw
3. Phillips™ screwdriver
5. Vacuum pump capable of pulling to 350 microns
6. Manifold gauge set designed for this type of equipment
7. Manifold gauge hoses with 5/16" connections or 1/4" to 5/16" adapters.
8. Tubing benders
9. R-410A Flaring tool
10. Adjustable wrench
11. Nitrogen regulator
12. Nitrogen flow meter
13. Tube cutter
14. Torque wrench set
88-M4MHW18-1C-EN 7