Lochinvar Copper-Fin 497 User's Information Manual
  1. Manuals
  2. Brands
  3. Lochinvar Manuals
  4. Boiler
  5. Copper-Fin 497
  6. User's information manual

Lochinvar Copper-Fin 497 User's Information Manual

Hide thumbs Also See for Copper-Fin 497:
Table of Contents

Advertisement

Quick Links

Download this manual
CBX-CWX-USER_100160894_2000001311_Rev E
User's Information Manual
Models: 497 - 2067
⚠WARNING
If the information in this manual is not followed exactly, a fire or
explosion may result causing property damage, personal injury or
loss of life.
This appliance MUST NOT be installed in any location where
gasoline or flammable vapors are likely to be present.
WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electric switch; do not use any phone in your
building.
• Immediately call your gas supplier from a near by phone.
Follow the gas supplier's instructions.
• If you cannot reach your gas supplier, call the fire department.
• Installation and service must be performed by a qualified
installer, service agency, or the gas supplier.
Save this manual for future reference.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Copper-Fin 497 and is the answer not in the manual?

Questions and answers

Related Manuals for Lochinvar Copper-Fin 497

Summary of Contents for Lochinvar Copper-Fin 497

  • Page 1 CBX-CWX-USER_100160894_2000001311_Rev E User’s Information Manual Models: 497 - 2067 ⚠WARNING If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life. This appliance MUST NOT be installed in any location where gasoline or flammable vapors are likely to be present.

  • Page 2: Table Of Contents

    Contents HAZARD DEFINITIONS ..........2 3. OPERATING INSTRUCTIONS ........8 PLEASE READ BEFORE PROCEEDING ..... 3 4. IGNITION MODULE 1. PREVENT COMBUSTION AIR CONTAMINATION 4 Diagnostic Status Indication ..........9 2. MAINTENANCE SCHEDULE ........5 Ignition and Control Timings ..........9 Maintenance Procedures ...........

  • Page 3: Please Read Before Proceeding

    User’s Information Manual Please read before proceeding This is a gas appliance and should be Improper installation, adjustment, NOTICE ⚠WARNING installed by a licensed electrician and/or alteration, service or maintenance can cause certified gas supplier. Service must be injury or property damage. Refer to this manual for assistance performed by a qualified service installer, or additional information, consult a qualified installer, service service agency or the gas supplier.

  • Page 4: Prevent Combustion Air Contamination

    User’s Information Manual Prevent combustion air contamination If the boiler combustion air inlet is located ⚠WARNING Table 1A Corrosive Contaminants and Sources in any area likely to cause contamination, or if products which would contaminate Products to avoid: the air cannot be removed, you must have the combustion air and vent re-piped Spray cans containing chloro/fluorocarbons and terminated to another location.

  • Page 5: Maintenance Schedule

    User’s Information Manual Maintenance schedule Owner maintenance Service technician (see pages 6 - 7 for detailed instructions) General: • Address reported problems • Check boiler area • Inspect interior; clean and vacuum if Daily necessary; • Check pressure/temperature gauge • Check for leaks (water, gas, flue, condensate) •...

  • Page 6: Maintenance Procedures

    User’s Information Manual Maintenance schedule Maintenance procedures Check vent piping Visually inspect the flue gas vent piping for any signs of Appliance must be serviced and maintained blockage, leakage, or deterioration of the piping. Notify your qualified service technician at once if you find any The appliance must be inspected and started ⚠WARNING problems.

  • Page 7: Test Low Water Cutoff (If Installed)

    User’s Information Manual Maintenance schedule (continued) Test low water cutoff (if installed) Read the boiler pressure/temperature gauge to make sure the system is pressurized. Lift the relief valve If the system is equipped with a low water cutoff, test the top lever slightly, allowing water to relieve through low water cutoff periodically during the heating season, the valve and discharge piping.

  • Page 8: Operating Instructions

    User’s Information Manual Operating instructions FOR YOUR SAFETY READ BEFORE OPERATING WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury or loss of life. If you cannot reach your gas supplier, A.

  • Page 9: Ignition Module

    User’s Information Manual Ignition module Diagnostic Status Indication Figure 4-1_Hot surface igntion control module The ignition module has an LED which indicates the status of the safety circuits. A remote Ignition Module Status indicating light is wired from the ignition module Status LED and mounted on the diagnostic panel.

  • Page 10: Operation And Diagnostic Lights

    User’s Information Manual Ignition module Operation and diagnostic lights TABLE 4B The diagnostic control panel has up to 6 indicating and Status LED Diagnostic Codes diagnostic lights to show all major steps of operation and Code control sensed malfunctions. This panel is located on the front Condition Lights Sequence of the unit.
  • Page 11 User’s Information Manual Notes...

  • Page 12: Revision Notes

    Revision Notes: Revision A (ECO C07390) initial release. Revision B (ECO C12077) reflects the update of ignition timing information on page 9. Revision C (PCP #3000021634 / CN #500011858) reflects an update to the chart on page 5. Revision D (PCP #3000030852 / CN #500020656) reflects an update to the owner maintenance schedule on page 5.

This manual is also suitable for:

Copper-fin 2067

Table of Contents