Warns of material damage! ▶ The quickstart guide must be available to every user. ▶ The liability and warranty for types 2030, 2031, 2031 K, 2032, Important tips and recommendations. 2033 and 2037 do not apply if the quickstart instructions are not observed.
▶ In the potentially explosion-risk area the diaphragm valves of Risk of injury from high pressure and discharge of medium. Types 2030, 2031, 2031 K, 2032, 2033 and 2037 may be used ▶ Before working on the device or system, switch off the pres- only according to the specification on the separate Ex type sure.
Page 5
Type 2030, 2031, 2031 K, 2032, 2033, 2037 BASIC SAFETY INSTRUCTIONS Risk of burns and risk of fire due to hot device surface if duty cycle is long or medium temperature is high General hazardous situations. ▶ Keep the device away from highly flammable substances and media and do not touch with bare hands.
Contact addresses CONTACT ADDRESSES TECHNICAL DATA Conformity Germany The types 2030, 2031, 2031 K, 2032, 2033 and 2037 are com- Bürkert Fluid Control Systems pliant with the EU Directives according to the EU Declaration of Sales Center Conformity. Christian-Bürkert-Str. 13-17...
Page 7
Type 2030, 2031, 2031 K, 2032, 2033, 2037 Technical data Control functions Labeling of tube valve body (VP) Closed by spring force in rest position Material Company logo Heat Opened by spring force in rest position Actuating function via reciprocal pressurization 1.4435...
Page 8
Type 2030, 2031, 2031 K, 2032, 2033, 2037 Technical data Application conditions Medium temperature for diaphragms: Material Temperature Remarks WARNING! [°C] Danger of bursting from overpressure. EPDM (AB) -10...+130 +140 °C / Steam sterilization up to If the device explodes, there is a risk of serious injuries, 60 min...
Page 9
Type 2030, 2031, 2031 K, 2032, 2033, 2037 Technical data Maximum permitted medium pressure: Control pressure for control function A: Permitted medium pressure depending on the medium temperature The values apply to body made of: • plastic, for plastic bodies: •...
Type 2030, 2031, 2031 K, 2032, 2033, 2037 Installation INSTALLATION Before installation • Before connecting the valve, ensure that the pipelines are DANGER! aligned. Danger – high pressure. • The flow direction is optional. ▶ Turn off the pressure and vent the lines before loosening 7.1.1...
Page 11
Type 2030, 2031, 2031 K, 2032, 2033, 2037 Installation 7.1.5 Welding tank bottom body type 2033 Mark upwards Recommendation Observe sequence: Inclination to 1. Weld the tank bottom body onto the base of the tank the line axis before installing the tank. Welding onto a tank which has α...
Page 12
Type 2030, 2031, 2031 K, 2032, 2033, 2037 Installation 1. Welding tank bottom body onto the tank. WARNING! NOTE Risk of injury from incorrect installation. Before welding, note the following: Non-observance of the specified tightening torque is haz- ▶ Use only welding material which is suitable for the tank bot- ardous as the device may be damaged.
Page 13
Type 2030, 2031, 2031 K, 2032, 2033, 2037 Installation Procedure for control function A → Pressurize the lower control air connection with compressed Upper control air connection air (value on type label) (see “Fig. 5: Control air connection”). (for SFB and SFI) →...
Page 14
Type 2030, 2031, 2031 K, 2032, 2033, 2037 Installation 7.2.2 Connection of the control medium Leakage Control function A: detection bore → Connect control medium to lower connection. Diaphragm socket Control function B: Diaphragm → Connect control medium to upper connection.
Type 2030, 2031, 2031 K, 2032, 2033, 2037 Transportation, Storage, Disposal TRANSPORTATION, STORAGE, DISPOSAL NOTE! Transport and storage damage. • Protect the device against moisture and dirt in shock- resistant packaging during transportation and storage. • Permitted storage temperature: -40...+55 °C.
Need help?
Do you have a question about the 2031 and is the answer not in the manual?
Questions and answers