Advertisement
M-UM009-03
DLS 360
Quick Start Guide
Dual Laser Source
INFORMATION CONTAINED IN THIS MANUAL IS BELIEVED TO BE ACCURATE AND RELIABLE, HOWEVER,
NO RESPONSIBILITY IS ASSUMED BY RIPLEY ODM FOR ITS USE NOR FOR ANY INFRINGEMENTS OF
PATENTS OR OTHER RIGHTS OF THIRD PARTIES THAT MAY RESULT FROM ITS USE. NO LICENSE IS
GRANTED BY IMPLICATION OR OTHERWISE UNDER ANY PATENT RIGHTS OF RIPLEY ODM.
THE INFORMATION CONTAINED IN THE PUBLICATION IS SUBJECT TO CHANGE WITHOUT NOTICE.
RIPLEY ODM LLC
171 DANIEL WEBSTER HWY, UNIT 1
BELMONT, NH 03220 USA
■
■
P: (603) 524-8350 E: TECH.SUPPORT@ODM.RIPLEY-TOOLS.COM W: WWW.RIPLEY-TOOLS.COM
TECHNICAL SUPPORT DOCUMENT
Advertisement
Table of Contents
Related Manuals for Ripley ODM DLS 360
Summary of Contents for Ripley ODM DLS 360
- Page 1 INFORMATION CONTAINED IN THIS MANUAL IS BELIEVED TO BE ACCURATE AND RELIABLE, HOWEVER, NO RESPONSIBILITY IS ASSUMED BY RIPLEY ODM FOR ITS USE NOR FOR ANY INFRINGEMENTS OF PATENTS OR OTHER RIGHTS OF THIRD PARTIES THAT MAY RESULT FROM ITS USE. NO LICENSE IS GRANTED BY IMPLICATION OR OTHERWISE UNDER ANY PATENT RIGHTS OF RIPLEY ODM.
-
Page 2: Important Safety Information
1. Connector Adapter - Interchangeable The DLS 360 comes with an SC screw-on adapter. Additional adapters are available from Ripley. Refer to page 5 for more information. 2. Wavelength Indicator This unit offers 1490 nm and 1625 nm wavelengths. When the DLS 360 is turned on, the red light indicates which wavelength is selected. -
Page 3: Output Power
LASER HAZARD Please note that 1490 nm and 1625 nm wavelengths are not visible to the human eye. Do not look directly into the output port of the DLS 360 or directly into any fiber connector that may be live. Since the laser is invisible to the eye, the eye’s natural blink reflex is suppressed. -
Page 4: Maintenance
Unpacking & Inspection The DLS 360 is supplied with a soft carry case, SC adapter installed on the unit, 3.0V CR2 battery, and an instruction card. Contact Ripley immediately if any part of the unit or packaging is damaged, or otherwise unsatisfactory. -
Page 5: Specifications
Care must be taken to avoid objects that may damage the fiber inside the adapter mount. Always inspect and clean fibers before mating them to the device. If scratches or breaks occur on the fiber surface, please contact Ripley for proper service. Calibration All Ripley ODM®... -
Page 6: Contact Information
Contact Ripley Tools for information on recalibration and repair of test equipment. Ripley makes every effort to ensure that all information in this data sheet is accurate. Ripley Tools assumes no responsibility for any errors or omissions and reserves the right to modify this document at any time without notice.
Need help?
Do you have a question about the ODM DLS 360 and is the answer not in the manual?
Questions and answers