Rear Panel - IBM Accesser F5100 Appliance Manual

Table 4. Legend for front panel buttons and LEDs (continued)
Number
18
19
Physical buttons
The appliance includes three push-buttons on the front panel:
NMI
Issues a non-maskable interrupt to the server.
UID
Facilitates finding a system in a rack that is viewed from the front. On the front panel, the LED is on the
button. Similarly, a functioning UID button/LED is on the back panel.
Power
Applies or removes power from the power supply to the appliance. Powering down the appliance
removes the main power, but supplies stand-by power. The appliance must be unplugged before
servicing.
LEDs
The control panel has five LEDs to provide critical information for different components:
Disk activity
One LED serves to indicate activity for any of the front-mount hard disk drives. When the green light is
on or flashing, the hard disk is being accessed.
Unit identification LED (UID)
This LED facilitates finding a system in a rack that is viewed from the front. On the front panel, the LED
is on the button. Similarly, a functioning UID button/LED is on the back panel.
Power LED
Power supplied to PSUs; should be lit to indicate that power is applied to the server.
LAN active
When the green light is on, at least one of the LAN interfaces is active.
System Health
When the light is green, the system is working correctly. When the light is amber, a problem is
detected with system hardware. When the light is off, the disk drive is operational.

Rear panel

The rear panel contains I/O ports.
I/O ports
The I/O ports are color coded per the PC 99 specification. The locations of the various I/O ports are
shown in the following figure.
Figure 14. Rear panel I/O ports for the appliance
12 IBM Cloud Object Storage System: Accesser F5100 Appliance Manual
Description
Asset tag (a pullout mylar tag for customer use)
Rack mount screw (2)