Related Manuals for Porter-Cable is 20
Summary of Contents for Porter-Cable is 20
- Page 1 20VMax* Lithium 6-1/2 inch (165mm) Circular Saw *Maximum initial battery pack voltage (measured without a workload) is 20 volts. The nominal voltage is 18. Instruction manual CATALOG NUMBER PCC660...
-
Page 2: Safety Guidelines - Definitions
SAfety GuIdelINeS - defINItIoNS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information. dANGeR: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. -
Page 3: Safety Instructions For All Saws
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) do not overreach. keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. -
Page 4: Kickback Causes And Related Warnings
minimize body exposure, blade binding, or loss of control. e) Hold the power tool by insulated gripping surfaces only, when performing an operation where the cutting tool may contact hidden wiring. Contact with a “live” wire will also make exposed metal parts of the power tool “live” and could give the operator an electric shock. - Page 5 • use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control. • keep your body positioned to either side of the blade, but not in line with the saw blade.