No.
Part name
Exchange of
5) Remove the screw of the P.C. board
4
electric parts
(Continued)
6) Remove the screw of the earth wire
7) Remove the screw of power supply
8) Remove the lead wires of indoor
9) Remove the P.C. board of support
10) Cut the binding band and remove
2. Attachment
1) Install it in the reverse of the procedure
2) Apply heat silicones to E-parts.
Procedure
(Screw:M3x14, 7pcs.) (Fig. 4-4)
(Screw:M4x8, 1pc.) (Fig. 4-4)
terminal box (Fig. 4-4)
power supply (Fig. 4-4)
spacer 3 position (Fig. 4-4)
clamp filter. (Fig. 4-5)
to remove it.
(Fig. 4-6)
(Fig. 4-4)
(Fig. 4-6)
- 98 -
Remarks
Screws
Spacer
Power supply
terminal box
Earth wire
Indoor power
binding band
(Fig. 4-5)
Heat Silicones