Toshiba RAV-GV1601ATP-TR Service Manual page 89

<Indoor unit address>
Push the TEMP.
5
6 Push the TIME
Push the button.
7
(It is OK if the display turns on.)
<Group address>
8 Push the TEMP.
Push the TIME
9
individual, set the address to
Individual : 0000
Header unit : 0001
Follower unit : 0002
Push the button.
10
(It is OK if the display turns on.)
11 Push the button.
The address setting is complete.
( flashes. You can control the unit after
SETTING
<RBC-ASCU11- >
2,5
3,4
1
Push and hold the [menu +
2
Push the [OFF timer] button to confirm the selected indoor unit.
<Line (system) address>
3
Push the [menu] button until the CODE No. flashes. And using the [
specify the CODE No.12.
4
Push the [menu] button until the SET DATA flashes. And using the [
a system address.
5
Push the [OFF timer] button to confirm the SET DATA.
/ buttons repeatedly to set the CODE No. to
/ buttons repeatedly to set an indoor unit address.
/ buttons repeatedly to set the CODE No. to
/ buttons repeatedly to set a group address. If the indoor unit is
0000 0000
0000 0000 0000
; header unit,
}
In case of group control
SETTING
6
] buttons at same time for more than 10 seconds.
0001 0001
0001 0001 0001
; follower unit,
has disappeared.)
2
3,4
3,4
- 89 -
13 13 13 13 13
.
14 14 14 14 14
.
0002 0002
0002 0002 0002
.
or ] buttons,
or ] buttons, set