Table of Contents
Advertisement
11.4 Cleaning the front of the appliance
ATTENTION!
Incorrect cleaning may damage the front of the appli-
ance.
▶
Do not use glass cleaner, metal scrapers or glass
scrapers for cleaning.
▶
To prevent corrosion on stainless steel fronts, re-
move any limescale, grease, starch and albumin
(e.g. egg white) stains immediately.
▶
On stainless steel surfaces, use special stainless
steel cleaning products suitable for hot surfaces.
1.
Read the information on cleaning products.
→ Page 14
2.
Clean the front of the appliance using hot soapy wa-
ter and a dish cloth.
Note: Slight differences in colour on the front of the
appliance are caused by the use of different materi-
als, such as glass, plastic and metal.
3.
For stainless steel appliance fronts, apply a thin
layer of the stainless steel cleaning product with a
soft cloth.
You can obtain the stainless steel cleaning products
from the after-sales service or the online shop.
4.
Dry with a soft cloth.
11.5 Cleaning the control panel
ATTENTION!
Incorrect cleaning may damage the control panel.
▶
Never wipe the control panel with a wet cloth.
1.
Read the information on cleaning products.
→ Page 14
2.
Clean the control panel using a microfibre cloth or a
soft, damp cloth.
3.
Dry with a soft cloth.
11.6 Cleaning the door panels
ATTENTION!
Incorrect cleaning may damage the door panes.
▶
Do not use a glass scraper.
12 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
If the appliance is defective, call Customer Service.
▶
→ "Customer Service", Page 17
1.
Read the information on cleaning products.
→ Page 14
2.
Clean the door panels with a soft dish cloth and
glass cleaner.
Note: Shadows on the door panels, which look like
streaks, are caused by reflections made by the in-
terior lighting.
3.
Dry with a soft cloth.
11.7 Cleaning the door seal
ATTENTION!
Incorrect cleaning may damage the door seal.
▶
Do not use metal scrapers or glass scrapers for
cleaning.
▶
Do not use abrasive cleaning agents.
1.
Read the information on cleaning products.
→ Page 14
2.
Clean the door seal with hot soapy water and a soft
dish cloth.
3.
Dry with a soft cloth.
11.8 Cleaning aid
The cleaning aid is a quick alternative for occasionally
cleaning the cooking compartment. The cleaning aid
softens dirt by vaporising the soapy water. The dirt can
then be removed more easily.
Setting the cleaning aid
1.
Add a few drops of washing-up liquid to a cup of
water.
2.
Place a spoon in the cup to prevent delayed boiling.
3.
Place the cup in the centre of the cooking compart-
ment.
4.
Set the microwave output to 600 W.
5.
Set the cooking time to 5 minutes.
6.
Start the microwave.
7.
Once the cooking time has elapsed, leave the doors
closed for an additional three minutes.
8.
Wipe out the cooking compartment with a soft cloth.
9.
Leave the cooking compartment to dry with the door
open.
WARNING ‒ Risk of electric shock!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
Only use genuine spare parts when repairing the
▶
appliance.
If the power cord of this appliance is damaged, it
▶
must be replaced by the manufacturer, the manufac-
turer's Customer Service or a similarly qualified per-
son in order to prevent any risk.
Troubleshooting en
15
Advertisement
Table of Contents
