Table of Contents
Advertisement
REFRIGERATOR INSTALLATION
REFRIGERATOR INSTALLATION
NOTE: Removing the doors is always recommended when it is necessary to move the refrigerator through a narrow
opening. If it is necessary to remove the handles, follow the directions below.
NOTE: Removing the doors is always recommended when it is necessary to move the refrigerator through a narrow
opening. If it is necessary to remove the handles, follow the directions below.
HOW TO REMOVE FREEZER DOOR HANDLE
HOW TO REMOVE FREEZER DOOR HANDLE
NOTE: Handle appearance may vary from illustrations on
this page.
NOTE: Handle appearance may vary from illustrations on
this page.
Removing Freezer Drawer Handle
Removing Freezer Drawer Handle
Loosen the set screws located on the lower side of the
handle with a 1/8 in. (3.1 mm) Allen wrench and remove
Loosen the set screws located on the lower side of
the handle.
the handle with a 1/8 in. Allen wrench and remove the
handle.
NOTE: If the handle mounting fasteners need to be
tightened or removed, use a ¼ in. (6.4 mm) Allen
NOTE: If the handle mounting fasteners need to be
wrench.
tightened or removed, use a ¼ in. Allen wrench.
HOW TO REPLACE FREEZER DOOR HANDLE
NOTE: Handle appearance may vary from illustrations on
HOW TO REPLACE FREEZER DOOR HANDLE
this page.
NOTE: Handle appearance may vary from illustrations on
this page.
Replacing Freezer Drawer Handle
Place the handle on the door by fitting the handle
Replacing Freezer Drawer Handle
footprints over the mounting fasteners and tightening
the set screws with a 1/8 in. (3.1 mm) Allen wrench.
Place the handle on the door by fitting the handle
NOTE: If the handle mounting fasteners need to be
footprints over the mounting fasteners and tightening
the set screws with a 1/8 in. Allen wrench.
tightened or removed, use a ¼ in. (6.4 mm) Allen
wrench.
NOTE: If the handle mounting fasteners need to be
tightened or removed, use a ¼ in. Allen wrench.
All manuals and user guides at all-guides.com
12
12
Advertisement
Table of Contents
