Audio Set Menu - Sony DSR-11 Operating Instructions Manual

Operating the Menus
Submenu
Icon/Menu
(page)
VTR SET
FROM STILL Selects the tape protection mode which to change the mode from the still mode.
VTR
FROM REC
P
DV EE OUT
(page 36 (GB))
STILL PICT

AUDIO SET menu

Submenu
Icon/Menu
(page)
AUDIO SET AUDIO
A
MODE
(page 38 (GB))
44
(GB) Chapter 3 Adjusting and Setting Through Menus
Setting
STEP FWD : Forwards one frame.
STOP: Stops the tape.
Selects the tape protection mode that the system changes to after the recording has been
paused for more than five minutes.
STOP : Stops the tape.
REC PAUSE: Maintains the recording pause mode.
Note
When the recording pause mode continues for a long time after you select REC PAUSE, the
tape may be damaged or the video heads may be damaged or clogged. If there is no other
reason to do this, select STOP. Particularly when you use a Mini-DV cassette that is longer
than 60 minutes, select STOP.
Selects the output from the DV IN/OUT connector in the EE mode.
OFF : Does not output DV signals converted from analog input signals.
ON: Outputs DV signals from the DV IN/OUT connector that were converted from selected
analog input signals.
Notes
• During playback, the unit outputs DV signals from the DV IN/OUT connector regardless of
this setting.
• When you connect a computer to the DV IN/OUT connector, depending on your computer
software, the selected analog input signals may be output to the computer even if this item
is set to OFF.
Selects the image displayed in the still mode.
AUTO : Displays an optimized image according to the movement in the image.
FRAME: Displays a frame image.
FIELD: Displays a field image.
Note
If you select FIELD, the image of field 2 is displayed.
Setting
Selects the audio mode.
FS32K : Switches the audio mode to the four channel mode (12-bit mode).
FS48K: Switches the audio mode to the two channel stereo mode (16-bit mode). (This
setting records the sound in all audio ranges, providing a high-quality sound recording.)
Notes
• This item is disabled when inputting signals from the DV IN/OUT connector.
• You cannot display the selection screen while in the recording mode.
• Noise may occur at the moment you switch the audio mode.
• When you are going to dub sounds onto the tape, set this item to FS32K. (To dub a sound
onto a tape, you need another VCR which has audio dubbing capabilities. This unit does
not have this function.)