Audio Set Menu - Sony DVCAM DSR-25 Operating Instructions Manual

Operating the Menus

AUDIO SET menu

Submenu
Icon/Menu
(page)
AUDIO SET AUDIO
A
MODE
(page 52 (GB))
JOG AUDIO
64
(GB) Chapter 5 Adjusting and Setting Through Menus
Setting
Selects the audio mode.
FS32K : Switches the audio mode to the four channel mode (12-bit mode).
FS48K: Switches the audio mode to the two channel stereo mode (16-bit mode). (This
setting records the sound in all audio ranges, providing a high-quality sound recording.)
Notes
• When signals are input via the DV jack, the audio mode of the signals to be recorded is
the same as that of the input signals. The setting of this item is ignored.
• You cannot change the setting of this item during recording.
• Noise may occur at the instant you switch the audio mode.
Turns sound output on/off when the tape is played at a speed other than normal.
OFF : Does not output the sound when playing a tape at a speed other than normal.
ON: Outputs the sound when playing a tape at a speed other than normal.
Note
Even if you have set this item to ON, the sound may not be output or interrupted depending
on the tape format (DVCAM/DV) or tape conditions.