Table of Contents
Advertisement
Use Handsfree mode for calls
The handsfree mode can be used for both GSM and PTT
calls. You can use the answer/end call button on the head-
set phone or the remote control button in the Car Kit which
enables you to talk on the phone without holding the
phone.
When connected to a wired
headset
GSM calls
1.
Press or click the headset button to accept a call.
2.
Press and hold the headset button to end the call.
3.
To record the conversation, press the headset button
during a call.
PTT calls
1.
Press or click the headset button to accept a call.
2.
Click the headset button to start speaking.
3.
Click again when you finish speaking. You need not
hold the button as you would for the
Click to Talk
facility is termed '
4.
To end a PTT call, press and hold the headset button.
5.
Similarly, to reject the call, press and hold the headset
button
PTT
key; this
'.
76
Outgoing calls: You can make outgoing calls
only to a predefined contact. To make a call to
a predefined contact, Click and hold the
head set button for a couple of seconds.
When placed in a Car Kit
dashboard holder
GSM Calls
1.
Click and release the remote control button to accept
the call.
2.
Click and hold the remote control button to reject the
call.
3.
To end the call, click and hold the remote control but-
ton..
Outgoing calls: When using the Nokia CK-
7W car kit with the Sonim XP1(bt) it is not
possible to make outgoing GSM calls. The user
needs to dial from the phone keypad for mak-
ing out going calls.
PTT Calls
1.
Click and release the remote control button to accept
the PTT call.
Advertisement
Table of Contents
