Sonim XP1 User Manual page 28

Delete list Removes a network provider from
the existing list.
Available networks Locates and displays the network
providers available to you.
Add existing Displays a list of existing network
providers. Allows you to add a
network provider list. Select
to add a network provider to the
preferred networks list.
Add network code Allows you to enter the code
applicable to a network, typically
required when using the roaming
service. The saved PLMN (Public
Land Mobile Network) is added to
the preferred networks list.

Attach GPRS: permits continuous GPRS connectivity
when the option Always attached
Attached during PDP session, if you want GPRS
connectivity only when required.

Register again: allows you to register your phone to
a different network. This option works only when
Search Mode is set to Manual.

Network account: is used to connect to the GSM or
GPRS network. Contact your service provider to
change the existing factory profiles and to acquire the
correct parameter updates. Connection errors are
1.
2.
Add



is selected. Select

22
caused due to wrong parameters. Certain predefined
profiles may be locked to prevent re-configuration.
The following options are dependent on your network
operator and the service you have requested.
On the Network account screen, choose a network
account and select Option > View
network account information.
Select Option > Edit > OK to modify the following
account information.
Account name: allows you to rename the selected
network account.
Bearer: allows you to choose from two protocols for
WAP service. You can either choose GSM only or GPRS
only. GPRS is required to access the WAP service.
GSM settings: The following GSM settings can be
configured:
Data call type: choose between ISDN and Analogue.
Phone number: enter the number you need to dial.
When your phone connects to the Internet, it will dial
this number automatically.
User name: the user name required to log in to the
WAP server.
User password: the corresponding password that
enables you to log in to the WAP service.
GPRS settings: configures the settings for APN
(Access Point Name - a requirement for GPRS), User
> OK to view the