Advertisement
Available languages
Available languages
EN
FR
ES
AirPlay2
Wi-Fi
iPhone
Pioneer XXXXXXXX XXXXX
Pioneer XXXXXXXX XXXXXX
Pioneer XXXXXXXXX
IT
DE
NL
SV
e.g., iOS 11.4
JP
JP
繁中
If the version of the iOS device is iOS11.4 or later, you can play the music of the
iOS device on this unit and other devices that support AirPlay2.
1. Connect the iOS device to the access point where this unit is connected via
network.
2. Tap the AirPlay icon
on the play screen of the music play application on
the iOS device, and select this unit and AirPlay2-supported devices to play
from the displayed devices.
• AirPlay2-supported devices are displayed with white circle on the right
side.
• Multiple AirPlay2-supported devices can be selected.
• The volume can be adjusted on individual devices.
3. Play the music file on the iOS device.
• If "Network Standby" is set to Off (default value: On) in Setup menu, manually
turn the unit on and then press NET on the remote controller.
• Due to the characteristics of AirPlay wireless technology, the sound produced
on this unit may slightly be behind the sound played on the AirPlay-enabled
device.
You can also play the music files on a PC with iTunes (Ver. 12.8 or later)
equipped. Confirm that this unit and the PC are connected to the same network
beforehand. Then, press NET on this unit. Next, click the AirPlay icon
in iTunes, select this unit and AirPlay2-supported devices to play from the
displayed devices, and start play of a music file.
Additions to the Setup menu following:
You can change the model name of this unit displayed on the device connected
via Airplay (default value: Pioneer model name XXXXXX) to a more easily
understood name by pressing
and selecting "Network Bluetooth" - "Network" - "AirPlay Device Name".
1. Press ENTER to display the Edit screen.
2. Select a character or symbol with the cursors, and press ENTER.
Repeat this operation to input up to 31 characters.
"A/a": Switches between upper and lower cases. (Pressing MODE on the
remote controller also toggles between upper and lower cases)
"←" "→": Moves the cursor in the arrow direction.
(or SETUP button) on the remote controller
Advertisement
