Clutch Lever - Yamaha R6 2023 Owner's Manual

Instrument and control functions
ments of 500 r/min. From 13000 r/min
to 18000 r/min, the shift light can be set
in increments of 200 r/min.
1. Push the "RESET" button to set
the activation point engine speed.
2. Push the "SELECT" button to con-
firm the setting. The control mode
changes to the shift light deactiva-
tion point setting function.
5
To set the shift light deactivation point
TIP
The deactivation range is the same as
the activation range. However, be sure
to set the deactivation point to a higher
engine speed than the activation point,
otherwise the shift light will not come
on.
1. Push the "RESET" button to set
the deactivation point engine
speed.
2. Push the "SELECT" button to con-
firm the setting. The control mode
changes to the shift light bright-
ness function.
To adjust the shift light brightness
1. Push the "RESET" button to set
the shift light brightness level.
2. Push the "SELECT" button to con-
firm the setting and exit the dis-
play brightness and shift light
control mode.
5-15

Clutch lever

1
1. Clutch lever
To disengage the drivetrain from the
engine, such as when shifting gears,
pull the clutch lever toward to the han-
dlebar. Release the lever to engage the
clutch and transmit power to the rear
wheel.
TIP
The lever should be pulled rapidly and
released slowly for smooth shifting.
(See page 7-3.)
EAU12823