Charging The Battery - Newland NLS-MT95 User Manual

Charging the Battery

Connect the MT95 to a power outlet using the included AC adapter or USB cable. When the terminal's battery is less than
5%, it takes about 4 hours to fully charge it (The terminal is shut down or in sleep mode).
When charging the MT95 with an AC adapter or USB cable, the user is notified of the charging status by the LEDs on the
terminal.
Note:
1. If the MT95 battery is completely drained, please press the power key to turn it on after 15 minutes of being charged.
2. When charging, make sure that the indoor temperature is above 0 degrees Celsius (32 degrees Fahrenheit). The
device will stop charging at a low temperature for safety consideration.
5
Green LED on
Red LED on
Red LED flashes constantly
Blue LED flashes constantly
LEDs on the MT95
Fully charged
Charging in progress
Low-battery alert
Incoming call/message reminder