Newland NLS-MT95 User Manual page 43

Advanced: The features listed here are designed to improve the scanning performance and energy efficiency of the
terminal.
1. Acuscan Decoding: When selected, the terminal only decodes the barcode aimed squarely by the aiming pattern. It
is advised to select it to ensure that only the desired barcodes are read if multiple barcodes are placed closely
together.
2. Multiple Barcodes: When selected, the terminal can decode multiple barcodes at the same time, and the maximum
number of the barcodes can be set per actual needs.
3. Other: Tap DETAIL to access the following parameter settings.
Noise Reduction: This feature is designed to reduce noise in images produced by the terminal. However, the terminal
shows a slight decrease in scanning speed when using this feature. It is recommended to enable it only when necessary.
Exposure Level: Select high, middle or low level per actual need.
Power Plan: Two options are provided.
Power Saving: The terminal's built-in scanner turns off automatically after 3 seconds of inactivity.
High-performance: The terminal's built-in scanner turns off automatically after 15 seconds of inactivity.
OCR Enable: Select this check box when reading passports (compliant with ICAODoc9303 standards, TD1/TD2/TD3
supported).
37
-