Wireless Functionalities; Use & Maintenance - Newland NLS-MT95 User Manual

Portable data collector
Table of Contents

Advertisement

Wireless Functionalities

Do not use the terminal's wireless functionalities where wireless device use is prohibited or where it may cause interference
or danger, such as in aircrafts, petrol stations.
Use & Maintenance
Do not use damaged or faulty AC adapters. Use only the battery and AC adapter provided by Newland.
Do not dispose of terminals in a fire as they may explode.
Do not continue to charge a battery that is fully charged. Overcharging will shorten battery lifespan.
Charge the device before the battery is exhausted; Excessive battery discharge will have a bad impact on the device.
In severe cases, it may cause the device to fail to boot normally.
Avoid charging in a low or high-temperature environment. The most suitable temperature for charging is at 5° C–45° C
(41° F–113° F), and it cannot be charged below 0° C (32° F).
If the device is not used for a long time, it will discharge slowly. During the storage, it is recommended to shut down
the device and regularly recharge it (at least every six months). Ideally, Battery should be stored between 30% to 50%
state of charge.
If the battery is swelling, bulging, or having other abnormalities, please stop using it immediately.
If the battery life is significantly shortened, please replace it with a new battery.
If the terminal cannot be switched on after experiencing a sudden or unexpected power loss or other abnormalities,
immediately contact your dealer or Newland after-sales service center
Do not throw, drop, or strike the terminal. Doing so may damage the LCD display, interrupt running programs, cause
data loss in memory, and result in malfunction.
Clean the scan window regularly. Do not touch it with hands. Scratched or smudged window may degrade reading
performance.
Do not tap the touch screen with sharp objects. Doing so may damage the screen or cause internal short circuits.
Use only dry soft cloth to clean the terminal. Cleaning it with a wet cloth or benzene/ thinner/ other volatile chemicals
may deform and shorten the service life of the terminal's shell.
Sudden temperature drops may cause condensation on the shell, which could cause malfunction. Care should be
taken to avoid condensation. If condensation occurs, dry the terminal before use.
Properly dispose of and recycle terminals. Do not dispose of them as household garbage.
70

Advertisement

Table of Contents
loading

Table of Contents