Charging The Battery - Newland NLS-NFT10 User Manual

Charging the Battery

Connect the NFT10 to a power outlet using the included AC adapter or USB cable. When the terminal's battery is less than
5%, it takes about 3 hours to fully charge it (The terminal is shut down or in sleep mode).
When charging the NFT10 with AC adapter or USB cable, the user is notified the charging statuses by the LEDs on the
terminal.
Note: If the NFT10 battery is completely drained, please press the power key to turn on after 15 minutes of being charged.
5
LEDs on the NFT10
Green LED on
Red LED on
Red LED flashes constantly
Fully charged
Charging in progress
Low-battery alert